Tascam DA-40 owner manual REW and F FWD keys, Stop key, Play key, Pause key, Record key

Page 12

2 - Parts of the tape deck

In the above example, the tape is currently on pro- gram 8, and must move two programs forward before the correct program (i.e. program 10) is reached.

The flashing number on the right of the display should be used as the definitive indication of how many programs will be skipped (if the SKIP keys are pressed too quickly, it is possible that some of the key presses will not be recognized).

When the start of the desired program is reached, the tape deck will enter the play mode if the tape was playing before the skip operation, otherwise it will enter pause mode.

[12] REW and F FWD keys

Use these keys to wind backwards or forwards fast through the tape.

If the tape is stopped or paused, and one of these keys is pressed, << or >> will be shown on the right of the display to indicate the direction of the tape move- ment, if the margin is being displayed (see DISPLAY [23]).

If normal mode has been selected (3.12, "Fast for- ward mode"), pressing either of these keys when the tape is playing will start fast forward or rewind.

If the tape is playing when one of these keys is pressed, and cue mode has been selected (3.12, "Fast forward mode"), the tape enters a “cue” or “review” mode, in which the tape is played forward or back- ward at twice or four times normal speed . The cue/ review speed can be changed by pressing the REW or F FWD key again, and is shown on the display as >>2/>>4 (cue), <<2/<<4 (review).

[13] STOP key

Use this key to stop the transport from whatever mode is currently selected. This includes the “input monitor” mode (see [16] below).

[14] PLAY key

Use this key to start playing when the tape is stopped or paused, or to start recording when the tape is in record pause mode (see below).

The indicator above the key will light when the tape is playing back. In this case, the indicator will be the only transport indicator lit.

The indicator may also be lit in combination with the PAUSE indicator, showing that the unit will enter playback mode almost instantly when the PLAY key is pressed.

If the REC indicator is lit together with the PLAY indicator, the unit is recording.

If the tape is locating as the result of a command to search for the beginning of a program (skip or pro- gram play), and the unit was in play mode before this search operation started, the PLAY indicator will flash, showing that the unit is in “auto play” mode, and playback will restart when the location is reached.

[15] PAUSE key

Use this key to put the tape deck into pause mode, as explained below.

If the tape is stopped or playing, pressing the PAUSE key will put the tape deck into paused play mode (the PLAY and PAUSE indicators will both light).

If the tape deck is in “input monitor” mode (see [16] below), pressing and holding down the RECORD key and pressing the PAUSE key will put the tape deck into record ready mode (the PAUSE and RECORD indicators will both light).

From the record ready mode, pressing the PLAY key will start recording (the PLAY and RECORD indi- cators will both light).

If the tape deck is left in pause mode for some time (three minutes or so), it will drop back into stop mode.

[16] RECORD key

Use this key for recording, as described here.

Press this key once to enter the “input monitor” mode. In this mode, the display gives information about the current status of the tape deck and the con- nections, ensuring that clock signals, digital audio connections, etc. are properly made before recording starts.

If all clock connections are in order, the display will show ANALOG in, AES/EBU or COAXIAL. The peak level meters will show the signal levels received through the selected inputs.

In the case of the latter two digital options, the sam- pling frequency (either 32, 44 or 48) will be shown. If a digital input source is selected, and the sampling frequency of the received signal is outside the allowable range (± 0.1%) the display will show the signal source (AES/EBU or COAXIAL), followed by a question mark. Input monitoring is possible, but recording is not possible.

12 TASCAM DA-40

Page 11 Page 13
Image 12
Page 11 Page 13
Contents DA-40 Important Safety Precautions Important for U.K. CustomersImportant Safety Instructions Table of Contents Specifications Features Installation of the tape deckIntroduction to the DA-40 Unpacking and inspectionMaking connections Block Diagram Power connectionsFront and Rear panels Power and display Recording mode and source switches, etcParts of the tape deck Tape controls REW and F FWD keys Stop keyPlay key Pause keyREC Mute key Shuttle wheelData dial Command keys Counter ModeMargin Reset CharSkip Play Single PlayRear panel Balanced Analog Outputs Menu functions Drum time head timeAuto ID level Auto ID timeRepeat mode Record mute timeDigital output format Copy prohibit10End tally signal 12Fast forward mode14Initializing settings 15Viewing points at which block errors have occurredMenu functions Shift functions INS/+ and DELID markers START, SKIP, END, Char and renumbering Selecting an ID mode Manually writing a Start or Skip IDWriting a Start or Skip ID Writing an END ID Erasing a Start or Skip IDErasing an END ID Erasing titlesSetting location memories Edit keyLocation memories Locating to location memoriesProgram mode Character editing titlingEntering and editing titles Writing the title to tape Checking a titleDeleting a title Copying and pasting a titleRC-D45 remote control unit option ID SelectOPEN/CLOSE PositionRemote control transport keys RepeatREC Mute Specifications Audio specificationsSpecifications Physical specificationsDimensional drawing Error messages Serious error messagesIndex a O Auto IDIndex P SpdifDA-40
Related manuals
Manual 34 pages 32.84 Kb

DA-40 specifications

The Tascam DA-40 is a professional-grade digital audio tape recorder designed for a variety of audio production applications, including music recording, broadcasting, and post-production. Known for its durability and reliability, the DA-40 has established itself as a popular choice among sound engineers and musicians.

One of the main features of the Tascam DA-40 is its ability to record in both high-quality digital formats and traditional DAT (Digital Audio Tape). It supports sampling rates of 44.1 kHz and 48 kHz, which are industry standards for audio recording. This flexibility allows users to choose the format that best suits their workflow, making it an excellent tool for archiving, mastering, or live recording.

The DA-40 employs advanced digital processing technologies to provide superior sound quality. Its 20-bit digital audio converter ensures that recordings are captured with precision and clarity, preserving the nuances of the source material. Additionally, the DA-40 features a dynamic range of 100 dB, contributing to its reputation for delivering high-fidelity audio.

For ease of operation, the DA-40 is equipped with an intuitive user interface. The front panel includes an alphanumeric display that provides essential information like track status, timecode, and remaining tape length, making it user-friendly even in complex recording situations. The machine also offers multiple transport controls, allowing for precise navigation through recordings during playback or editing.

Another characteristic of the DA-40 is its versatility in connectivity options. It features balanced XLR inputs and outputs, along with unbalanced RCA connections, making it compatible with a wide range of audio equipment. The built-in S/PDIF digital output allows for seamless integration with digital audio workstations and other digital devices, enhancing its usability in modern studio environments.

The Tascam DA-40 is also designed with reliable performance in mind. Its rugged construction ensures that it can withstand the demands of live environments while providing consistent operation. Moreover, the unit supports automatic tape advance and rewind functions, streamlining the workflow for busy professionals.

In conclusion, the Tascam DA-40 is a highly capable digital audio tape recorder that combines advanced recording technology with user-friendly features. Its flexibility in audio formats, high-quality sound reproduction, versatile connectivity options, and durable design make it an essential tool for audio professionals aiming to achieve the best results in their production endeavors.
Top Page Image Contents