Tascam DA-40 owner manual Rear panel

Page 16

2 - Parts of the tape deck

[31] SHIFT

This key is a latching key. When active, the indicator beside and above the key lights, and the command keys take on their shifted functions, as indicated by the blue captions above them.

See 4, "SHIFT functions" for details of these shifted functions.

2.5 Rear panel

[32] DIGITAL (AES/EBU) INPUT/OUTPUT

These XLR-type connectors conform to the AES/ EBU3-1992 standard and are used to accept (INPUT) and transmit (OUTPUT) digital audio data in that format. The INPUT connector can also receive balanced IEC60958 format (SPDIF) data. The format of data received (AES/EBU or SPDIF) is automatically detected.

[33] DIGITAL (COAXIAL) INPUT/OUTPUT

These RCA connectors conform to the IEC60958 standard (SPDIF), and are used to accept (INPUT) and transmit (OUTPUT) digital audio data in that standard. The INPUT connector can also receive unbalanced AES/EBU3-1992 format data. The for- mat of data received (AES/EBU or SPDIF) is auto- matically detected.

[34] CONTROL I/O

This 15-pin ’D’-sub connector is used for connection to a suitably-equipped controller.

As well as the mode described in the table below, this connector can also be used as a serial connector. Please contact your TASCAM distributor for details of this facility.

The pinouts of this connector are given below:

Pin

Signal

 

Direction

Function

number

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

STOP

IN

 

External com-

 

 

 

 

mand reception;

2

FWD PLAY

IN

 

 

active when low

 

 

 

 

 

 

 

 

(at ground poten-

3

F.FWD

IN

 

 

tial for 30 ms or

 

 

 

 

4

REW

IN

 

more)

 

 

 

 

 

5

PAUSE

IN

 

 

 

 

 

 

 

6

REC PLAY

IN

 

 

 

 

 

 

 

7

SERIAL

IN

 

 

 

 

 

 

 

Pin

Signal

Direction

Function

number

 

 

 

 

 

 

 

 

 

 

 

 

 

8

Ground

—

—

 

 

 

 

9

FWD PLAY

OUT

Transmit trans-

 

TALLY

 

port status indica-

 

 

 

tion signals in

10

F.FWD TALLY

OUT

open collector

 

 

 

 

 

 

(maximum allow-

11

REW TALLY

OUT

able voltage 15 V

 

 

 

12

STOP TALLY

OUT

and maximum

 

 

 

allowable current

13

REC/PLAY

OUT

80 mA)

 

TALLY

 

 

 

 

 

 

14

PAUSE TALLY

OUT

 

 

 

 

 

15

TAPE END

OUT

 

 

TALLYa

 

 

a.See 3.10, "End tally signal"

[35]REMOTE IN

This 3.5 mm jack is used to connect the optional RC- D45 remote control unit.

Do not use this jack to connect any remote control unit other than one designed especially for use with the tape deck.

[36] Power cord

Make sure that the power supply voltage matches the voltage requirements of the tape deck as marked on the rear panel. If there is any doubt, consult your TASCAM dealer.

[37] (BALANCED) ANALOG INPUTS

These female XLR connectors provide balanced inputs at a nominal +4 dBu level. The wiring of these connectors is:1 = ground, 2 = hot, 3 = cold. The nom- inal impedance of these connectors is greater than 25 kΩ.

[38] (UNBALANCED) ANALOG INPUTS

These RCA connectors provide unbalanced inputs at a nominal –10 dBV level. The nominal impedance of these connectors is greater than 50 kΩ.

[39] (UNBALANCED) ANALOG OUTPUTS

These RCA connectors provide unbalanced outputs at a nominal –10 dBV level. The nominal impedance of these connectors is less than 1 kΩ.

16 TASCAM DA-40

Page 15 Page 17
Image 16
Page 15 Page 17
Contents DA-40 Important Safety Precautions Important for U.K. CustomersImportant Safety Instructions Table of Contents Specifications Features Installation of the tape deckIntroduction to the DA-40 Unpacking and inspectionMaking connections Block Diagram Power connectionsFront and Rear panels Recording mode and source switches, etc Power and displayParts of the tape deck Tape controls REW and F FWD keys Stop keyPlay key Pause keyShuttle wheel REC Mute keyData dial Command keys Counter ModeMargin Reset CharSkip Play Single PlayRear panel Balanced Analog Outputs Menu functions Drum time head timeAuto ID level Auto ID timeRepeat mode Record mute timeDigital output format Copy prohibit10End tally signal 12Fast forward mode14Initializing settings 15Viewing points at which block errors have occurredMenu functions INS/+ and DEL Shift functionsID markers START, SKIP, END, Char and renumbering Manually writing a Start or Skip ID Selecting an ID modeWriting a Start or Skip ID Writing an END ID Erasing a Start or Skip IDErasing an END ID Erasing titlesSetting location memories Edit keyLocation memories Locating to location memoriesCharacter editing titling Program modeEntering and editing titles Writing the title to tape Checking a titleDeleting a title Copying and pasting a titleRC-D45 remote control unit option ID SelectOPEN/CLOSE PositionRepeat Remote control transport keysREC Mute Specifications Audio specificationsSpecifications Physical specificationsDimensional drawing Error messages Serious error messagesIndex a O Auto IDIndex P SpdifDA-40
Related manuals
Manual 34 pages 32.84 Kb

DA-40 specifications

The Tascam DA-40 is a professional-grade digital audio tape recorder designed for a variety of audio production applications, including music recording, broadcasting, and post-production. Known for its durability and reliability, the DA-40 has established itself as a popular choice among sound engineers and musicians.

One of the main features of the Tascam DA-40 is its ability to record in both high-quality digital formats and traditional DAT (Digital Audio Tape). It supports sampling rates of 44.1 kHz and 48 kHz, which are industry standards for audio recording. This flexibility allows users to choose the format that best suits their workflow, making it an excellent tool for archiving, mastering, or live recording.

The DA-40 employs advanced digital processing technologies to provide superior sound quality. Its 20-bit digital audio converter ensures that recordings are captured with precision and clarity, preserving the nuances of the source material. Additionally, the DA-40 features a dynamic range of 100 dB, contributing to its reputation for delivering high-fidelity audio.

For ease of operation, the DA-40 is equipped with an intuitive user interface. The front panel includes an alphanumeric display that provides essential information like track status, timecode, and remaining tape length, making it user-friendly even in complex recording situations. The machine also offers multiple transport controls, allowing for precise navigation through recordings during playback or editing.

Another characteristic of the DA-40 is its versatility in connectivity options. It features balanced XLR inputs and outputs, along with unbalanced RCA connections, making it compatible with a wide range of audio equipment. The built-in S/PDIF digital output allows for seamless integration with digital audio workstations and other digital devices, enhancing its usability in modern studio environments.

The Tascam DA-40 is also designed with reliable performance in mind. Its rugged construction ensures that it can withstand the demands of live environments while providing consistent operation. Moreover, the unit supports automatic tape advance and rewind functions, streamlining the workflow for busy professionals.

In conclusion, the Tascam DA-40 is a highly capable digital audio tape recorder that combines advanced recording technology with user-friendly features. Its flexibility in audio formats, high-quality sound reproduction, versatile connectivity options, and durable design make it an essential tool for audio professionals aiming to achieve the best results in their production endeavors.
Top Page Image Contents