Planar PT1945S, PT1945RW manual Connecting the Display Figure

Page 10

Connecting the Display (Figure 8.1)

To setup this display, please refer to the following figure and procedures.

1.Be sure all equipment is turned off.

2.Connect the AC power cord to the power connector on the monitor and the other end into an electrical outlet (8.1).

3.Connect the D-SUB cable from the display's VGA input connector to the D-SUB connector of your host computer and tighten the screws (8.1).

4.Connector the audio-in cable from the audio input port of your display to the audio out port of your computer (8.1).

5.Connect the RS-232 or USB cable from the RS-232 or USB port of your display to the RS-232 port or USB port (8.1) of your computer.

6.Configure the touch screen. Refer to the “Touch Screen Driver Installation” section on page 21.

7.Once the touch screen is configured, the monitor is ready for use.

!Notice!

To ensure the LCD display works well with your computer, please configure the display mode of your graphics card to make it less than or equal to 1280 x 1024 resolution and make sure the timing of the display mode is compatible with the LCD display.

We have listed the compatible “Video Modes” of your LCD display in the appendix (on page 19) for your reference.

7

Page 9 Page 11
Image 10
Page 9 Page 11
Contents USER’S Guide Important Recycle Instructions Table of Contents Precautions Usage NoticeAbout PT1945R/PT1945RW/PT1945S Features includeIntroduction Touch Screen for PT1945R/PT1945RWPackage Overview Front View InstallationProduct Overview PT1945R/PT1945S Bottom ViewStart Your Installation PT1945RW Connecting the Display Figure PT1945R/PT1945S Kensington Security Slot Vesa Mount Your Monitor Remove the Deskstand User Controls Side Panel ControlsHow to Use the OSD Menus Please noteOn-Screen Display Menus Main OSD MenuTroubleshooting AppendixNo Signal Product Dimensions 279.5 mm 457.8 mm 312.2 mm Mode Resolution Frequency KHz Frequency Hz Compatibility ModesVesa Wxga Touch Screen Driver Installation PT1945R/PT1945RW/PT1945S Optional Calibration Tool InstallPT1945R/PT1945RW/PT1945S Install Instructions CustomPlease Note Product Registration and Technical Support Cables, Replacement Lamps, Accessories Technical SupportRegister Your Planar Products Today Planar Systems, Inc
Related manuals
Manual 30 pages 59.28 Kb

PT1945R, PT1945RW, PT1945S specifications

The Planar PT1945S, PT1945RW, and PT1945R are advanced touch screen monitors designed for a myriad of applications, including retail, hospitality, and various interactive environments. These monitors are known for their durability, versatility, and user-friendly features, which make them ideal for businesses looking to enhance customer engagement and streamline operations.

One of the standout features of the PT1945 series is the high-quality display. With a 19-inch screen that offers a vivid resolution of 1280x1024 pixels, the monitors ensure sharp and clear visual output. This is complemented by a wide viewing angle, which allows users to see the screen clearly from different positions. The high brightness levels further aid visibility, making it suitable for varying ambient light conditions.

Touch technology is at the forefront of the Planar PT1945 lineup. These monitors utilize advanced capacitive touch technology, which enables highly responsive and accurate touch input. This technology supports multi-touch functionality, allowing users to execute gestures more intuitively, enhancing the interactive experience. Whether it's pinching to zoom or swiping through menus, users can expect smooth and precise operation.

Another hallmark of the PT1945 series is connectivity. With multiple input options, including VGA, DVI, and USB, these monitors can easily integrate into existing systems and workflows. This versatility means that they can be used with various devices and software applications, making them ideal for a range of environments.

Durability is also a key characteristic of the PT1945 series. Designed for heavy use, these monitors feature a ruggedized construction that can withstand the rigors of constant interaction. This build quality helps ensure longevity, making them a smart investment for businesses that require reliable and long-lasting technology.

The user-friendly design extends to the ergonomics of the monitors. They can be adjusted for various viewing angles, enhancing comfort during long periods of use. Moreover, the monitors are equipped with anti-glare screens, which reduce reflections and facilitate easier visibility in bright environments.

In summary, the Planar PT1945S, PT1945RW, and PT1945R color monitors combine impressive display quality, advanced touch technology, versatile connectivity, and robust durability. These features make them an excellent choice for businesses aiming to leverage touch screen technology for improved customer interaction and streamlined workflows. With their user-friendly design and reliability, the PT1945 series stands out as a leader in the touch monitor market, catering to a diverse range of applications and industries.
Top Page Image Contents