d. power on
Turn on both of the monitor and computer. After the monitor is power on, the LED lights up green, If the LED become red and flashing, please check the video signal cable fig.2 connection If LED is off, please press power on switch .
2.1.4.1 Self test pattern |
|
|
|
|
|
|
|
|
|
|
| ATLANTIS LAND | |||||||
If there is no horizontal or vertical sync. signals, |
|
| |||||||
your monitor will display as fig.2 to indicate no |
|
|
|
|
|
|
|
|
|
signal input. After a few seconds, the monitor |
|
|
|
|
|
|
|
|
|
will enter into waiting and saving power mode. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
the LED will be red and flashing. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
Once the monitor receives the video signal, it |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
will return to normal mode. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
2.1.5Adjust picture
In order to obtain the best visual display, you must adjust it, please refer to chapter 3“operation of the monitor”.
•Hanging style
The customer may hang the monitor on the wall when necessary. operations as following
•take down the base and the signal cable clip, you will see two bolts in the knighthead. screw down the two bolts and take apart the plastic covers and screw down the bolts that connect the knighthead and axis of the rotation.
•clear up the signal cable, power cord and audio cable
•hook the monitor on the wall by the four holes of the back of monitor
2.2Operations
2.2.1Power on/off switch
This is a
2.2.2Power LED indicator
When the monitor is working, the power LED is green. If the monitor is in saving power mode, the power LED will be red and flashing. If you turn off the computer, the power led is off. When the LED is off, the monitor is off, but
the power adapter is on. For the purpose of security,
you should turn off adapter power when you don’t use the monitor.
| 9 / 45 |