Axis Communications manual Axis M7014/M7010 Video Encoder Installation Guide, Package contents

AXIS M7014/M7010 Installation Guide Page 5

AXIS M7014/M7010 Video Encoder

Installation Guide

This installation guide provides instructions for installing the AXIS M7014/M7010 video encoder on your network. For all other aspects of using the product, please see the product’s User’s Manual, available on the CD included in this package, or from www.axis.com

Installation steps

Follow these steps to install the AXIS M7014/M7010 on your local network (LAN):

ENGLISH

1.Check the package contents against the list below.

2.Hardware overview. See page 6.

3.Install the hardware. See page 7.

4.Assign an IP address. See page 9.

5.Set the password. See page 12.

Package contents

Important!

This product must be used in compliance with local laws and regulations.

Item	Models/variants/notes
Axis video encoder models	AXIS M7014
	AXIS M7010
Power adapter models	AXIS M7014: Type PS-K
	AXIS M7010: Type PS-P
Mounting kit	AXIS M7014
	• 4 screws and 4 plugs to mount the encoder to a concrete wall
	AXIS M7010
	• 8 screws (for mounting with brackets)
	• 2 mounting brackets
	• 4 M6x20 screws for mounting in rack
	AXIS M7014/M7010
	• 4 Surface protection pads
	• Terminal block connectors (RS-485/RS-422: 2 x 2-pin connector
	for AXIS M7014; 8 x 2 pin connector for AXIS M7010, Power: 2-
	pin connector)
CD	AXIS Network Video Product CD, including product documentation,
	installation tools and other software
Printed Materials	AXIS M7014/M7010 Installation Guide (this document)
	Axis Warranty Document