AXIS M7014/M7010 Installation Guide | Page 9 |
Assign an IP address
Most networks today have a DHCP server that automatically assigns IP addresses to connected devices. If your network does not have a DHCP server the AXIS M7014 will use 192.168.0.90 as the default IP address.
AXIS M7010 will use 4 different IP addresses for each group of 4 video input connectors. Numbers on the video encoder indicate each set of four. 192.168.0.90 is the default IP address for group 1, 192.168.0.91 for group 2, 192.168.0.92 for group 3, and 192.168.0.93 for group 4.
AXIS IP Utility and AXIS Camera Management are recommended methods for setting an IP address in Windows. These free applications are available on the Axis Network Video Product CD supplied with this product, or they can be downloaded from www.axis.com/techsup. Depending on the number of cameras you wish to install, use the method that suits you best.
Method | Recommended for | Operating system |
|
|
|
AXIS IP Utility | Single video encoder | Windows |
See page 10 | Small installations |
|
|
|
|
AXIS Camera Management | Multiple video encoders | Windows 2000 |
See page 11 | Large installations | Windows XP Pro |
| Installation on a different subnet | Windows 2003 Server |
|
| Windows Vista |
|
|
|
Notes:
•If assigning the IP address fails, check that there is no firewall blocking the operation.
•For other methods of assigning or discovering the IP address of the AXIS M7014/M7010, e.g. in other operating systems, see page 14.
ENGLISH