Remote buttons
POWER
HOME INPUT MENU
RESIZE
PIP
ON/OFF INPUT SWAP
POSITIONAUDIO
BRIGHTNESSCONTRAST
OK
BACKINFO
i
VOL UP
MUTE
VOL DOWN
POWER
HOME
INPUT
MENU
RESIZE
PIP
ON/OFF
PIP
INPUT
PIP
SWAP
PIP
POSITION
PIP
AUDIO
BRIGHTNESS
CONTRAST
BACK
OK
INFO
i
VOL UP
VOL DOWN
MUTE
Power: Switches the power on or puts the monitor into Standby.
Home: Changes the active source back to the embedded PC.
Input: Toggles the Input Source menu on and off, which allows the user to
change sources. Options include: HDMI1, HDMI2, PC, and VGA.
Menu: Turns the OSD menu on and off.
Resize: Switches between screen modes. Modes vary based on the source.
PiP On/Off: Turns the PiP function on and off and changes the PiP configuration between two active PiP sources. Options include corner and
PiP Input: Switches the PiP window source. Options include HDMI1, HDMI2,
PC, VGA, Component,
PiP Swap: Switches the position of the main and secondary sources.
PiP Position: Moves the PiP window position from corner to corner (upper left, upper right, lower left, lower right).
PiP Audio: Turns the PiP audio mix on and off.
Brightness: Opens the Brightness OSD menu. Use the right and left arrow buttons to adjust.
Contrast: Opens the Contrast OSD menu. Use the right and left arrow buttons to adjust.
Back: Returns the user to the previous menu.
Left, Right, Up, Down Arrows and OK: Use these buttons to navigate through and make changes to the Onscreen Menu features.
Info: Displays source information.
Vol up: Increases the audio volume of the following sources: HDMI 1, HDMI 2, Audio In L/R, Audio In 3.5mm and Audio Out L/R. The microphone volume level is controlled by the PC volume controls.
Vol down: Decreases the audio volume of the following sources: HDMI 1, HDMI 2, Audio In L/R, Audio In 3.5mm and Audio Out L/R. The microphone volume level is controlled by the PC volume controls.
Mute: Switches the audio on or off for the following sources: HDMI 1, HDMI 2, Audio In L/R, Audio In 3.5mm and Audio Out L/R.
INF7001a Hardware Guide | Page 11 |