Advanced Option
|
|
| ADVANCED OPTION |
|
|
|
| INPUT RESOLUTION | MODE1 |
|
|
| GAMMA SELECTION | |
|
|
| OVER SCAN | ON |
|
|
| SCAN CONVERSION | NORMAL |
|
|
| IR CONTROL | |
|
|
| KEYBOARD CONTROL | UNLOCK |
|
|
| MONITOR ID | ON |
|
|
| DDC/CI | |
|
|
| ADVANCED OPTION RESET | NO |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
<
Sel < > Adjust | Enter | Back | Quit |
Input Resolution: sets the resolution of the VGA input. This is only required when the monitor is unable to detect the
VGA input resolution correctly. Options include: 1024 x 768, 1280 x 768, 1360 x 768, 1366 x 768, 640 x 480, 720 x 480, 852 x 480, 800 x 600, 1064 x 600, 720 x 576, 1400 x1050, 1680 x 1050, 720 x 400, 640 x 400, 1440 x 900, 1600 x 900 and Auto.
Gamma Selection: adjusts the gamma value of the image and optimizes image brightness and contrast. Options
include: Mode 1, Mode 2, Mode 3.
Over scan: removes noise around the edges of a video image. Options include: On and Off (default).
Scan Conversion: adjusts the conversion of source images. Options include: Interlace and Progressive (recommended).
IR Control: disables and enables the IR sensor on the monitor. Options include: Normal (default; IR is enabled) and Lock (IR is disabled).
Keypad Control: disables and enables the keypad on the
Monitor ID: set the identification number of the monitor via the RS232C connection. Each monitor must have a unique
identification number when multiple monitors are connected. Range:
DDC/CI: enables and disables DDC/CI communication. Options include: On (default) and Off.
Advanced Option Reset: resets all Advanced Option menu items to factory default settings. Options: Yes and No.
Page 20