HANNspree HF289 manual Making Connections, Connecting to a PC

Page 10

MAKING CONNECTIONS

CONNECTING TO A PC

Turn off your computer before performing the procedure below.

1.Connect one end of the D-Sub cable to the back of the monitor and connect the other end to the computer’s D-Sub port.

2.Connect one end of the HDMI cable (Dual input mode optional) to the back of the monitor and connect the other end to the computer’s HDMI port.

3.Connect the audio cable between the monitor's audio input and the PC's audio output (green port).

4.Plug one end of the AC power cord to the LCD monitor’s AC input socket, and the other end to the Wall outlet.

5.Turn on your monitor and computer.

	Figure.2. Connecting to a PC
1.	Earphone	2.	Audio Input
3.	VGA Input	4.	YPbPr Input
5.	HDMI Input	6.	HDMI Input
7.	Power AC Input

10

Image 10

Contents HF289 LCD Monitor FCC Class B Radio Frequency Interference Statement CanadaRecycling Information Table of Contents Safety Notice PrecautionsSpecial Notes on LCD Monitors Preface Checking the Contents of the Package FeaturesBefore Operating the Monitor Power Installation InstructionsInstall Remove Connecting to a PC Making ConnectionsConnecting to a A/V Device Adjusting the Viewing Angle General Instructions Operating InstructionsControl Panel Buttons Front Panel Control Menu / ReturnHOW to Adjust a Settings BRIGHTNESS/CONTRAST Brightness ContrastVGA/DVI Mode YPbPr/HDMI Mode Zoom Mode Page Near Timing Mode Plug & Play DDC2B Feature Plug and PlayTechnical Support FAQ For General ProblemsPage Cable not Connected Error Message & Possible SolutionsMode Resolution Input not SupportSpecifications Appendix