HANNspree HF289 manual Near Timing Mode

SYSTEM

	While transferring via the HDMI port, it is recommended to set
AUDIO INPUT	AUDIO INPUT to HDMI; if no sound is outputted, it is recommended
	to select AUDIO INPUT as PC, and make sure the PC audio output
	cable is connected to monitor’s LINE IN (or AUDIO IN) port.
VOLUME	Select the 「VOLUME」option to change the volume level. Enter the
	option and adjust the level.
MUTE	Select 「MUTE」option to switch the function On or Off.
DDC/CI	Select the 「DDC/CI」option to switch the function On or Off. (Dual
	input mode optional)
	Use this function to detect multiple synchronized display frequency
	groups and select the best display frequency. You can set it to 「On」
	or 「Off」 to activate/disable PC Sync Display Mode. (Recommended
	for advanced users) [Only available with D-sub input]
NEAR TIMING MODE	Synchronized display frequency groups:
	1.	640x400、720x400
	2. 640x400@70、720x400@70、640x480@70
	3. 1024x768、1280x768、1360x768
	4.	1400x1050、1680x1050

FACTORY RESET

INFORMATION

Select the 「FACTORY RESET」option to reset to the monitor’s default setting. This will erase the current settings. Enter the option and select On or Off.

Display Horizontal frequency/Vertical frequency/Resolution information.

19