Schwitching ON/OFF

Switching the car audio system on/off

The car audio system can be switched on/off in a number of ways.

Switching the car audio system on/ off with the ignition

If the car audio system has been con- nected to your vehicle ignition, it is pos- sible to switch it on and off with the igni- tion.

You can also switch the car audio sys- tem on when the ignition is switched off.

➮Press down and hold 3 until the car audio system switches on.

Note:

To prevent the car battery from running down, the radio will switch off again au- tomatically after one hour.

Switching the car audio system on/ off with the removable front panel

➮Remove the release panel.

The car audio system will switch off.

➮Replace the release panel.

The car audio system will switch on again. The last settings used (radio, tape deck or CD changer) will be activated.

Switching the car audio system on/ off by pressing 3

➮Press 3to switch the car audio system on.

➮Press 3for longer than 2 seconds to switch the car audio system off again.

The system will then switch off.

Switching the car audio system on by inserting a cassette tape

If the system is switched off and there is no cassette in the tape deck,

➮press 9.

The flip release panel will open.

➮Insert the cassette into the tape deck with the open side facing to- wards the right until you feel resist- ance. Do not use force.

The cassette will be pulled automatically into the tape deck.

Do not attempt to assist or prevent this process.

➮Press the operating panel closed gently until you feel it click into place.

The audio system will switch on. Tape playback will begin.