Storing radio stations

RADIO OPERATION

➮Press MENU 8.

➮Press :repeatedly until “SENS” appears in the display.

➮Press:.

The currently selected setting will ap- pear in the display. “SENS HI6” indicates the highest level of sensitivity, “SENS LO1” the lowest. If you select “SENS LO”, “lo” will light up in the display.

➮Press :to select the desired sensitivity.

➮Once you have made your selec- tion, press MENU 8 or OK ;.

Storing radio stations manually

➮Select the desired memory bank FM1, FM2, FMT or either MW or LW (MW and LW do not apply to the Düsseldorf C50 and the Colo- rado DJ50).

➮Tune the radio into the desired sta- tion.

➮Press and hold down one of the station preset buttons 1 to 6 >on which you want to store the radio station for longer than two seconds.

Storing radio stations automatically (TravelStore)

You can automatically store the six ra- dio stations with the strongest reception in your current reception area (for FM only). These stations will be stored in the FMT memory bank.

Note:

Any stations stored previously in the memory bank will be deleted.

➮Press and hold down BND / TS 5 for longer than two seconds.

The storing process will begin. “TRAVEL-STORE” will appear in the display. After the stations have been stored, the radio will automatically be- gin to play the station stored on preset button 1 for the FMT memory bank.

Recalling stored radio stations

➮Select the desired station memory bank.

➮Press the station button 1 to 6 > on which you have stored the de- sired radio station.

Scanning the radio stations within reception range (SCAN)

You can scan all of the radio stations currently within your reception range. The scan time can be set in the menu to play from five to 30 seconds.

Starting SCAN

➮Press and hold down OK ;for longer than two seconds.

SCAN will begin. “SCAN” will appear briefly in the display, followed by the flashing station name or frequency of the radio station currently being scanned.