Programming with DSC
The car radio offers the facility to adjust cer- tain settings and functions to your require- ments and to store these changes with the aid of DSC (Direct Software Control).
The default settings are selected at the fac- tory.
An overview of the factory default settings is provided below for future reference.
To alter a programming setting:
•Press DSC.
Select and adjust the functions described below by means of the rocker and the ENT key. The status of adjustment is shown on the display.
ANGLE Adjust the display to your own viewing angle.
DIM DAY Select the display bright- ness for daylight (Stages 1- 9).
DIM NIGHT Select the display bright- ness for darkness (Stages
The brightness is switched over automatically by the headlights.
ON VOL Select the initial volume. Use << >> to select the de- sired initial volume.
If “LAST VOL” is selected, the initial volume is the same as that last selected.
nates interference from ad- jacent stations.
“SHARX ON” is the factory default setting.
HICUT
Treble frequencies are re- duced only when interfer- ence is present. Can be se- lected from NO HICUT (OFF) to HICUT 3 (strongest treble reduction). Decide for yourself which setting is the most pleasant.
FM/AM SENS
Change the sensitivity of the seek run.
“SENS 1” indicates close re- ception, “SENS 6” distant
/
Select function
<< >> Adjust/call up value
PEAK ON/OFF
Activate/deactivate the dy- namic volume level display.
SHARX Automatic bandwidth switch- ing on the FM band.
Where the station density is high, switch to SHARX ON with << >>: this largely elimi-
reception.
Select “SENS 1” if you wish to receive strong stations in the near range; select “SENS 6” if you also wish to receive weaker, distant sta- tions.
30