Condensed instructions
SCA - Scan
For sampling the tracks briefly (in CD changer mode, the tracks of all CDs).
Starting Scan:
Press SCA. The tracks are sampled briefly in turn in ascending order. The sampling time can be adjusted. (Refer to “Programming with DSC – SCANTIME”.)
Ending Scan:
Press SCA. The last track selected continues playing.
RPT - Repeat
CD tracks and, in changer mode, CDs, can be repeated.
Press the RPT key to select the follow- ing functions:
-REP TRCK = Repeat track
-REP CD = Repeat CD (only in changer mode)
-RPT OFF = Deactivate function.
TPM - Track Program Memory For storing and playing preferred tracks in CD and CD changer mode. Up to 30 CDs can be managed in CD mode and 99 CDs in changer mode with a maximum of 40 tracks per CD. (Refer to the “Storing tracks with TPM” section.)
CLR
For clearing the TPM memory (refer to the “Clearing the TPM memory” sec- tion).
5DPE
For activating/deactivating the equaliz- er and changing the equalizer settings.
Activating/deactivating the equalizer: Press DPE until the beep sounds. When the equalizer is activated, “EQ” appears in the display.
Changing the equalizer settings: Press DPE briefly. Further information on changing the equalizer settings: “Equalizer settings”:
6 Rocker
Radio mode |
| |
If the rocker is pressed on menu level | ENGLISH | |
2, menu level 1 is automatically called | ||
|
up.
/
Station seek
Up
Down
<</ >> Up/down in steps
(on FM, only when AF and PTY are deactivated)
FM only:
<</ >> Page through the transmission chains when AF is activated and PTY deactivated,
e.g.: NDR 1, 2, 3, 4,
7