Blaupunkt Mnchen RDM 169 operating instructions Condensed instructions, Next FM, Next AM, AMT, Bnd

Page 5

Condensed instructions

3 Adjusting the volume	Menu level 1	Menu level 2
Turn the knob to adjust the volume.	Station keys and memory levels	Adjusting radio functions

ENGLISH

The selected value is shown on the display. When switched on, the unit plays at the preselected volume (ON VOL).

ON VOL can be changed (refer to “Programming with DSC – ON VOL”).

4Softkeys/display

Softkey = key with variable function. The functions shown in the display can be selected.

Radio mode

In radio mode, use TU to toggle be- tween menu level 1 and menu level 2. The system automatically returns to menu level 1 when no key has been pressed for eight seconds.

NEXT - FM

Switch between the memory levels FM I, FM II, FM T.

NEXT - AM, AMT

Switch between the AM and AMT fre- quency bands.

ST1 - ST6

ST1- ST6 can be used on this menu level to store radio stations on the FM levels I, II and “T”.

You can store six stations each on the AM and AMT bands.

Store station –press one of the sta- tion buttons ST1- ST6 until the station can be heard again (beep).

Call up station –select the frequency band. On FM, select the memory level using NEXT and press the appropriate station key briefly.

NEXT - FM

Switch between the memory levels FM I, FM II, FM T.

NEXT - AM, AMT

Switch between the AM and AMT fre- quency bands.

BND

Select the frequency band and memo- ry level (FM I, FM II, FM T, AM, AMT).

SCA - Scan

a)PTY is deactivated (logo is lit nor- mally, not in reverse video)

Press SCA (Radio Scan) briefly – “SCAN” appears in the display alter- nately with the code of the sampled station. All stations on the frequency band which can be received are sam- pled briefly.

5

Image 5

Contents München RDM 169 US 13 12 Contents Condensed instructions Next FM Condensed instructionsNext AM, AMT BNDMIX ExitCLR RPT RepeatDPE RockerAUD AUD DSC-MODE PTYDisplay DIS= TU Tuner CDCRemote control RC Traffic safety Read the following before using the unitAccessories GuaranteeKeyCard anti-theft protection system Switching on the unitRemoving the KeyCard Teaching in a second KeyCard/ replacing a KeyCardKeyCard anti-theft protection system Selecting the operating Enhancing display Mode Legibility AF alternative frequency Radio operation with RDS Radio Data SystemSelecting the frequency band Activating/deactivating RDSRadio operation with RDS Radio Data System Station tuningPaging through the transmis- sion chains FM only Changing the memory level FMStarting Preset Scan Sampling stored stations with Preset ScanSelecting sampled stations/terminating Preset Scan Calling up stored stationsSwitching on Scan Automatic bandwidth switchingChanging the sensitivity of the seek run Selecting a sampled station/deactivat- ing ScanProgram type PTY Program TypeNews Inform Sports Talk Rock CLS Rock Adlt HIT Soft Rock Country Oldies Soft Nostalga Jazz ClassicalPTY priority Storing the program typeSampling stations with PTY-SCAN Activating CD mode CD mode/CD changer modeActivating changer mode Inserting a CDRepeating a track/CD CD mode/CD changer modeSelecting the display type Selecting CD and track MIX OFF MIX CDAssigning names to CDs Deleting the CD name/TPM store using DSC-UPDATEStarting Scan Ending ScanDeactivating hours adjustment Setting the timeClock Time Displaying the timeAdjusting the frequency level Equalizer settingAdjustment instructions Selecting a quality factor for the bass or mid-range Equalizer settingSelecting the preset sound setting Frequency ranges Tonal effect/problem Measure Bass range Tips on adjusting the equalizerLower mid-range Mid-rangePeak ON/OFF Programming with DSCFM/AM Sens CDC Name Displayed only in CD replay mode 12/24H ModeProgramming with DSC STEREO/MONOOverview of the factory default settings with DSC Technical dataEnd DSC programming/store settings AmplifierGlossary of technical terms Scan Glossar FachwortverzeichnisSoftkey Software key Key with variable functionBosch Gruppe