Programming with DSC
STEREO/MONO
Toggle << >>.
The display indicates the se- lected state briefly. STEREO is selected auto- matically when the unit is switched on.
AMP DELAY Energization delay of exter- nal amplifiers. DLAY OFF signifies no energization de- lay. DLAY 1 to DLAY 4 sig- nify the energization delay in seconds.
CLK AUTO/MAN
For activating/deactivating automatic hours correction. Refer also to “CLOCK time, hours correction”.
12/24H MODE
Select the time display
CLK ON/OFF The time can be displayed with the ignition on and the unit switched off. Select CLK ON in this case.
SCANTIME This setting defines the sampling time (5 - 30 sec- onds) for radio broadcasts and CD tracks.
AUX ON/OFF This menu item does not ap- pear when a CD changer is connected. “OFF” is the de- fault factory setting.
If an external unit is con- nected through AUX, “ON” must be selected.
LEARN KC This function enables you to teach in a second KeyCard.
ENGLISH
CDC NAME Displayed only in CD replay mode.
You can use this function to assign any desired name to the CDs. (Refer to “Assign- ing names to CDs”.)
CLOCKSET Manual adjustment of the time.
Use << >> to select hours/ minutes. The flashing range can be adjusted with 
/
. Press ENT briefly to save after completing the setting. Refer also to “CLOCK time”.
BEEP Confirmation signal for func- tions which require a key to be held down for approx. 1 second.
The volume can be selected from 0 to 9 (0 = off).
LED ON/OFF You can select between LED ON and LED OFF. When LED ON is selected, the “ON” knob flashes to provide additional security when the unit is switched off and the KeyCard removed.
Refer to the instructions un- der “KeyCard
READ KC The data can be read out from a KeyCard.
Unit data such as name, type number (76...) and seri- al number are displayed by the KeyCard supplied. Should you remove the Key- Card during the read pro- cess, “READ KC” appears in the display.
31