Adjusting seek tuning sensitivity

RADIO OPERATION

It is possible to adjust the sensitivity of the seek tuning function to tune the ra- dio into stations with strong reception signals only, or to those with weaker reception signals as well.

➮Press MENU 8.

➮Press :repeatedly until “SENS” appears in the display.

➮Press :.

The currently selected setting will ap- pear in the display.“SENS HI6” indicates the highest level of sensitivity, “SENS LO1” the lowest. If you select “SENS LO”, “lo” will light up in the display.

➮Press :to select the desired sensitivity.

➮Once you have made your selec- tion, press MENU 8 or OK ;.

Storing radio stations

Storing radio stations manually

➮Select the desired memory bank FM1, FM2, FMT or either MW or LW.

➮Tune the radio into the desired sta- tion.

➮Press and hold down one of the station preset buttons 1 to 6 > on which you want to store the radio station for longer than two seconds.

Storing radio stations automatically (TravelStore)

You can automatically store the six ra- dio stations with the strongest reception in your current reception area (for FM only). These stations will be stored in the FMT memory bank.

Note:

Any stations stored previously in the memory bank will be deleted.

➮Press and hold down BND / TS 5 for longer than two seconds.

The storing process will begin. “TRAVEL-STORE” will appear in the display. After the stations have been stored, the radio will automatically be- gin to play the station stored on preset button 1 for the FMT memory bank.

Recalling stored radio stations

➮Select the desired station memory bank.

➮Press the station button 1 to 6 > on which you have stored the de- sired radio station.

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS