RADIO OPERATION | TRAFFIC INFORMATION |
“SHARX OFF” means no bandwidth switching, “SHARX ON” means auto- matic bandwidth switching.
➮Press MENU 8 or OK ;.
Selecting the display of variable text
A number of radio stations use the RDS signal to transmit advertising or other texts in place of their station names.
These “variable texts” will appear in the display. It is possible to adjust your ra- dio so that these “variable texts” do not appear.
➮Press and hold down RDS 4 until “NAME FIX” appears in the display.
➮To have the “variable texts” dis-
played again, press and hold down RDS 4 until “NAME VAR” appears in the display.
Traffic information
Switching traffic information priority on/off
➮Press TIM @for longer than 2 sec- onds.
Traffic information priority is activated when the traffic congestion symbol lights up in the display.
Note:
You will hear a warning beep
●if you leave the reception area of the traffic information station you are tuned into.
●if you are listening to a CD, leave the reception area of the traffic in- formation station you are tuned into and the seek tuning function is un- able to find another traffic informa- tion station.
●if you switch from a traffic informa- tion station to a station which does not broadcast traffic information.
Then either switch off traffic information priority or switch to a different traffic in- formation station.
Adjusting the volume for traffic announcements
➮Press MENU 8.
➮Press 
:repeatedly until “TA VOLUME” appears in the display.
➮Press
:to adjust the traffic announcement volume.
➮Once you have adjusted the set- ting, press MENU 8 or OK ;.
40