Blaupunkt CD50 operating instructions Schwitching ON/OFF, Switching the car audio system on/off

Page 8

SCHWITCHING ON/OFF

Switching the car audio system on/off

The car audio system can be switched on/off in a number of ways.

Switching the car audio system on/ off with the ignition

If the car audio system has been con- nected to your vehicle ignition, it is pos- sible to switch it on and off with the igni- tion.

You can also switch the car audio sys- tem on when the ignition is switched off.

Press down and hold 3 until the car audio system switches on.

Note:

To prevent the car battery from running down, the radio will switch off again au- tomatically after one hour.

Switching the car audio system on/ off with the removable front panel

Remove the release panel.

The car audio system will switch off.

Replace the release panel.

Switching the car audio system on by inserting a CD

If the system is switched off and there is no CD in the CD player,

press 9.

The flip release panel will open.

Insert the CD into the CD player with the label facing up until you feel slight resistance. Do not use force.

The CD will be pulled automatically into the CD player.

Do not attempt to assist or prevent this process.

Press the operating panel closed gently until you feel it click into place.

The audio system will switch on. CD playback will begin.

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA

The car audio system will switch on again.The last settings used (radio, CD player or CD changer) will be activated.

Switching the car audio system on/ off by pressing 3

Press 3 to switch the car audio system on.

Press 3 for longer than 2 seconds to switch the car audio system off again.

The system will then switch off.

ESPAÑOL PORTUGUÊS

33

Image 8
Contents Heidelberg CD50 Page Page Operating Elements Contents Important Information Important informationRemovable Front Panel Removable front panelTheft protection system Removing the operating panelSwitching the car audio system on/off Schwitching ON/OFFVolume Control Volume controlAdjusting the power-on volume MuteAdjusting the volume of the beep Switching to the radio modeRadio Operation Radio operationBanks Tuning into radio stationsSelecting wavebands/memory Adjusting seek tuning sensitivity Storing radio stationsStoring radio stations automatically TravelStore Recalling stored radio stationsProgram Type PTY Adjusting the scan timeScanning the radio stations within reception range Scan Optimising radio reception HicutSwitching traffic information priority on/off Adjusting the volume for traffic announcementsRadio Operation Traffic Information Traffic informationSwitching TIM off/on Traffic Information MemoryTraffic Information Memory TIM Retrieving TIM messagesCD Player Operation CD player operationSwitching the display mode Repeating individual tracks RepeatInterrupting playback Pause Traffic radio information duringCD Player Operation CD Changer Operation CD changer operationRemoving the CD Starting CD changer operationCD Changer Operation Repeating individual tracks or entire CDs RepeatScanning all of the tracks on all CDs ScanInterrupting playback Pause Setting the time Displaying the clock brieflySelecting the 12/24-hour time display mode ClockTone and BALANCE/FADER Adjusting the tone and balance/faderSwitching Loudness on/off Switching the equalizer on/off Adjusting the equalizerEqualizer EqualizerAssistanceinsettingyourequaliser WhattodoExternal audio sources Adjusting the spectrometerSwitching the AUX output on/off TMC for dynamic navigation systems TMC SpecificationsSpecifications Blaupunkt-Werke GmbH
Related manuals
Manual 32 pages 21.4 Kb