RADIO OPERATION
Note:
It is necessary to activate/deactivate REG in the menu.
Switching REG on/off
➮Press MENU 8.
➮Press :repeatedly until “REG” appears in the display. “OFF” or “ON” will appear next to “REG”.
➮Press or:to switch REG off or on.
➮Press MENU 8 or OK ;.
Switching RDS functions on/off
➮To take advantage of the RDS
functions for AF and REG, press RDS 4.
Tuning into radio stations
You can tune into radio stations in a number of different ways.
Automatic seek tuning
➮Press or :.
The radio will tune into the next availa- ble station within reception range.
Manual station selection
You can also tune into radio stations manually.
➮Press or :.
When the RDS functions have been | Paging through the broadcasting | |
network (for FM only) | ||
activated, “RDS” will light up as a sym- | ||
bol in the display. When you activate | If a radio broadcasting network has |
RDS functions, “REG ON” or “REGmore than one station, you can page OFF” will appear briefly in the display. through the “station network”.
Selecting wavebands/memory | ➮ Press or :to tune into the | |
next station in the network. | ||
banks | ||
|
Using this car audio system, you can tune into radio stations on the FM, MW and LW (AM) wavebands. There are three memory banks for the FM wave- band and one memory bank each for MW and LW.
You can store six stations in each of these memory banks.
➮To switch between the different FM
memory banks or wavebands, press BND / TS 5.
Note:
To take advantage of this function, you must have activated the RDS functions.
It is only possible to tune into those sta- tions which have been received once before already.To do this, use the SCAN or TravelStore function.
36