MiniDisc operation

MINIDISC OPERATION

You can use this equipment to play any stan- dard MiniDisc.

●If there is no MiniDisc in the disc-drive:

➮Press the button, 1. The console opens.

➮Gently push the MiniDisc with the print- ed side upwards into the drive until you feel it stop.

The MiniDisc is automatically drawn into the disc-drive.

This process should not be interfered with manually, neither hindered nor accelerated.

➮Gently close the console until you feel it click into place.

The MiniDisc menu appears, the disc begins to play.

●If there is already a MiniDisc in the drive:

➮Press the MD button, <.

The MiniDisc menu appears and the disc begins playing exactly where it cut off.

➮Press the button, 1. The console opens.

➮Press the button on the opened con- sole.

The MiniDisc ejects.

➮Carefully remove the MiniDisc.

Note:

If you do not remove the MiniDisc within 30 seconds, it will be drawn back into the drive.

➮Press any arrow button, 7, until the number of the track you wish to hear ap- pears in the display.

Press the or the button, 7, once to re- start the track currently playing.

For a fast forward or reverse search,

➮Hold down any arrow button, 7, until the fast forward or reverse search be- gins.

➮Press the softkey, 4, indicating “MIX”.

“MIX MiniDisc” appears briefly in the display. The next track played will be selected at ran- dom.

Ending MIX

➮Press the softkey, 4, indicating “MIX” again.

“MIX OFF” appears briefly in the display.

Use this function to hear the start of each track on the MD:

➮Press the softkey, 4, indicating “SCA”

“SCAN” appears in the display. The start of each track is played in ascending order.

Note:

You can set the amount of each track played. Please read the section entitled “Setting Scantime” in the chapter entitled “Radio Op- eration”.

Ending SCAN: Continue listening

➮Press the softkey, 4, indicating “SCA” again

The current track continues playing.