EXTERNAL AUDIO SOURCES
External audio sources
Instead of the
The AUX input must be switched on in the menu.
You need an adapter cable to connect an ex- ternal audio source. You can obtain such a cable from your Blaupunkt dealer.
Switching the AUX input on and off
➮Press the MENU button, 8.
➮Press the button, 7, as often as is necessary for “AUX OFF” or “AUX ON” to appear in the display.
If “AUX ON” is displayed, the input has al- ready been switched on.
➮Press the or buttons, 7, in order to switch AUX on or off.
➮Press the OK button, 5 or the MENU button, 8, to leave the menu. The set- tings are then saved.
Note:
If the AUX input is switched on it can be se- lected with the CDC button, =.
Pre-amplifier / subout
You can use the connections provided on your car radio to connect an external
We recommend that you use matching prod- ucts from the Blaupunkt or Velocity ranges.
Switch-on delay for external pre- amplifiers
To prevent speakers from crackling when you switch on the player, you can set a
➮Press the MENU button, 8.
➮Press the or button, 7, as often as is necessary for “AMP DLAY” to ap- pear in the display.
➮Press the or buttons, 7, in order to adjust the
“DLAY OFF” means that there is no switch- on delay, while “DELAY 1” to “DELAY 4” indi- cate the delay time in seconds.
➮Press the OK button, 5or the MENU button, 8, to leave the menu. The set- tings are then saved.
ENGLISH
27