Blaupunkt MD70 installation instructions Equalizer

EQUALIZER

Equalizer Adjusting the equalizer

This device has a parametric digital equaliz- er. In this case, parametric means that in each of the three filters, one individual frequency can be emphasised or reduced (with a gain of +8 to -8 dB).

The following filters are available:

●	LOW EQ	32 - 200 Hz
●	MID EQ	250- 1,600 Hz
●	HIGH EQ	2,000 - 12,500 Hz

These filters can be set without using any measuring instruments. It allows the sound properties in the vehicle to be significantly affected.

➮Press the DEQ button, 6.

➮Select the “LOW EQ”, “MID EQ” or

“HIGH EQ” filter with the or button,

7.

➮To select the frequency, press the or button, 7.

➮Adjust the level with the or key, 7.

➮In order to select the next filter, first

press the OK button, 5, then the or button, 7.

➮When you have completed all the set- tings, press the DEQ button, 6.

ENGLISH

Adjustment instructions

When setting the equalizer, we recommend you use a CD, cassette or MiniDisc (depend- ing on your car radio) which you are familiar with.

Before making any adjustments to the equal- izer zero the tone settings and deactivate the loudness. For more information, read the sec- tion on “Tone and volume”.

➮Listen to a CD, tape cassette or Mini- Disc (according to how the radio is equipped).

➮Compare the sound you hear with how you feel it should be.

➮Now consult the “Equalizer adjustment guide” table for “Tone impression”.

➮Adjust the equalizer values as de- scribed under “Action”.

Switching the equalizer on and off

➮To switch off the equalizer, press the DEQ button, 6.

“LOW EQ” is shown on the display.

➮To switch off the equalizer, hold down the DEQ button, 6 until “DEQ OFF” briefly appears.

Adjusting the sharpness of the filter

➮Press the DEQ button, 6.

➮Select the adjustments for the sharp- ness of the individual filters “LO-Q-FAC”,

“MI-Q-FAC” or “HI-Q-FAC” with the or button, 7.

➮To adjust the sharpness of the filter, press the or button, 7.

➮In order to select the next filter, first

press the OK button, 5, then the or button, 7.

➮When you have completed all the set- tings, press the DEQ button, 6.

Selecting the tone preset

You can choose preset tone settings for the following musical styles.

●ROCK

●DISCO

●JAZZ

●CLASSIC

●VOCAL

Settings for these styles have already been programmed.

➮Press the DEQ button, 6.

25