Blaupunkt MD70 Clock Time, Setting the time, Selecting 12/24-hour clock mode

Page 23

TIME

CLOCK - Time

Setting the time

The clock time can be automatically set by means of the RDS signal. If you cannot re- ceive an RDS station, or if the RDS station to which you are listening does not support this function, it is also possible to set the time manually.

Having the time set automatically

In order to have the time set automati- cally, press the MENU button, 8.

Press the or button, 7, as often as is necessary for “CLK MAN” (manu- al) to appear in the display.

If “CLK AUTO” is displayed, automatic time setting is already active.

Press the button, 7, as often as is necessary for “CLK AUTO” to appear in the display.

Press the OK button, 5 or the MENU button, 8, to leave the menu. The set- tings are then saved.

If “CLK AUTO” has been selected and a sta- tion with the RDS time function (RDS-CT) is received, the clock is automatically adjusted.

Setting the time manually

In order to adjust the time, press the MENU button, 8.

Press the or button, 7, as often as is necessary for “CLOCKSET” to ap- pear in the display.

Press the or button, 7.

The time is shown on the display. The hours blink and can be adjusted.

Adjust the hours with the / button,

7.

When the hours have been set, press the button, 7.

The minutes blink.

Adjust the minutes with the / but- ton, 7.

Press the OK button, 5or the MENU button, 8, to leave the menu. The set- tings are then saved.

Selecting 12/24-hour clock mode

Press the MENU button, 8.

Press the or button, 7, as often as is necessary for “24 H MODE” or “12 H MODE” to appear in the display.

Press the or buttons, 7, to switch between the modes.

Press the OK button, 5or the MENU button, 8, to leave the menu. The set- tings are then saved.

Having the time displayed constantly when the device is switched off

If you want the time to be displayed when the device is switched of and the

ignition is switched on, press the MENU button 8.

Press the or button, 7, as often as is necessary for “CLK OFF” or “CLK ON” to appear in the display.

Press the or button, 7, to switch between the display being ON or OFF.

Press the OK button, 5or the MENU button, 8, to leave the menu. The set- tings are then saved.

24

Image 23
Contents New Orleans MD70 14 13 Operating Elements Contents Fitting Road safetyAccessories GuaranteeReplacing KeyCards / Training a second KeyCard KeyCard Theft ProtectionInserting the KeyCard Removing the KeyCardVisual theft protection LED KeyCard lost or damagedTraining a new KeyCard Entering the master code Switching on and off with the KeyCard Switching on and offSwitching on and off with the button Switching on and off with the vehicle ignitionMuting Adjusting the volumeAdjusting the switch-on volume Adjusting the volume for the confirmation tone beepTone and volume Adjusting the display brightness Adjusting the displayAdjusting the viewing angle Tuner Alternative Switching to Radio ModeRadio Operation RDS FunctionSaving a station automatically Travelstore Setting the stationSetting station search sensitivity Saving a stationProgram type PTY Setting sample duration ScantimeScanning through stations Optimising radio reception Changing information displayed Switching between stereo and monoSetting the tuner MiniDisc operation Programming favourite MD tracks Changing display contents MD textRepeating tracks Scrolling MD TextSelecting a track CD changer operation optionalStarting CD changer operation Selecting a CDSampling all tracks on all CDs Scan Changing the display contentsRepeat play of individual tracks or whole CDs Repeat Playing tracks in random sequence MIXProgramming favourite CD tracks Naming CDsDeleting titles from the list Clock Time Setting the timeSelecting 12/24-hour clock mode Equalizer Level meter / Spectrometer Equalizer adjustment guidePre-amplifier / subout Switching the AUX input on and offSwitch-on delay for external pre- amplifiers External audio sourcesPre-amp Out Technical dataAmplifier TunerBlaupunkt-Werke GmbH