System connections (continued)
Antenna connection
Supplied FM antenna:
Connect the FM antenna wire to the FM 75 OHMS jack and position the FM antenna wire in the direction where the strongest signal can be received.
Supplied AM loop antenna: Connect the AM loop antenna to the AM and GND terminals. Position the AM loop antenna for optimum reception. Place the AM loop antenna
FM | AM loop |
antenna | antenna |
| ANTENNA |
FM | GND AM |
Speaker connection
Front speakers:
Connect the black wire to the FRONT SPEAKERS
Front speaker (right) | Front speaker (left) |
| IMPEDANCE : 6 OHMS MIN. |
Preparation for Use
on a shelf, etc., or attach it to a stand or a wall with screws (not supplied).
75 OHMS
Note:
Placing the antenna on the unit or near the AC power cord may cause noise pickup. Place the antenna away from the unit for better reception.
Installing the AM loop antenna: |
|
< Assembling > | < Attaching to the wall > |
Wall Screws (not supplied)
| RATED SPEAKER |
Front speaker (right) | Front speaker (left) |
| Red |
| Black |
Caution:
Connect the speaker wires to the speakers first, then to the unit. If you use other speakers with impedance lower
than that specified, the unit may be damaged. Front speakers: 6 ohms Do not mistake the right and the left channels. The right speaker is the one on the right side when you
face the unit. | Incorrect | |
Do not let the bare speaker wires touch each other. | ||
|
Do not allow any objects to fall into or to be placed in the bass reflex ducts.
Do not stand or sit on the speakers. You may be
injured.
Incorrect
12