Subwoofer control
Before you turn the system on/off on the main unit, minimize the speaker volume on the main unit and turn the VOLUME control of the subwoofer to
Subwoofer light up
The subwoofer unit surface will light up and blink according to BASS
SOUND LEVEL.
During STAND-BY MODE (demo mode):
When subwoofer is turned ON, the subwoofer unit will emit blinking light.
During
Notes:
Observe the following to avoid malfunction and sound distortion. Do not set the volume too high on the main unit. The subwoofer may be damaged.
Before you switch on/off on the main unit, minimize the volume on the main unit.
Unplug the AC power cord when connecting the subwoofer cable.
Power switch
Press the POWER ON/OFF button to turn ON the Active subwoofer.
Volume control
Turn the VOLUME control clockwise to increase the volume, and turn it counterclockwise to decrease the volume.
Crossover frequency control
Adjust the high frequency
To emphasize the bass, turn this control toward 35 Hz and increase the volume.
Preparation for Use
17