CD-G14000 Listening to a cassette tape (TAPE 1 or TAPE 2)
Tape Playback
Before playback:
For playback, use normal or
Do not use
Before loading a tape into the cassette compartment, tighten the slack with a pen or a pencil.
Tape playback
1Press the
2Open the cassette
compartment by pushing the area marked “”.
3Load a cassette into the
TAPE 1 compartment or TAPE 2 compartment with the side to be played facing toward you.
TAPE 1 TAPE 2
4Press the TAPE (1 2) button to select the cassette you want to listen to.
5 Press the / (TAPE ) to start playback.
Tape play indicator
Auto power on function:
When you press any of the following buttons, the unit turns on. TAPE (1 2) button (main unit and remote control): The unit turns on and the “TAPE” function is activated.
TAPE button on the remote control: The unit turns on and the “TAPE” function is activated.
/ button on the main unit: The unit turns on and playback of the last function starts (CD, TAPE, TUNER, AUDIO IN).
Auto power off function:
In the stop mode of tape operation, the main unit enters the stand- by mode after 15 minutes of inactivity.
32