Programmed play
You can choose up to 32 selections for playback in the order you like.
1While in the stop mode, press the MEMORY button to enter the programming save mode.
2Press one of the 
1 - 
5 buttons
to select the desired disc.
Selected disc number
3Press the direct search buttons
on the remote control to select the desired track.
Selected track number
You can also select a track by pressing the
or
button.
4 Press the MEMORY button to save the track number.
5Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be programmed.
If you make a mistake, the programmed tracks can be cleared by pressing the CLEAR/DIMMER button.
6Press the 
(CD 
) button.
The total number in memory will appear.
7Press the 
/ 
button to start playback.
To clear the programmed selections: Press the CLEAR/DIMMER button on the remote control while the “MEMORY” indicator is flashing.
Each time the button is pressed, one track will be cleared, beginning with the last track programmed.
To cancel the programmed play mode:
While in the stop mode and the “MEMORY” indicator is lit, press the CLEAR/DIMMER button on the remote control. The “MEMORY” indicator will disappear and all the programmed contents will be cleared.
Adding tracks to the program:
If a program has been previously stored, the “MEMORY” indicator will be displayed. Then follow steps 1 - 6 to add tracks. The new tracks will be stored after the last track of the original program.
To check which tracks are programmed:
While the unit is stopped in the programmed play mode, press the 
or 
button.
Notes:
When a disc with programmed tracks is ejected, the program is automatically canceled.
Even if you press the
During the program operation, random play is not possible.
CD or MP3/WMA disc Playback
25