Radio Operation
Selecting Bands
Press SRC as needed to access FM1, FM2, FM3/FMT, AM/AMT banks.
Tuning Sensitivity
Press SENS for more that 2 seconds to switch between lo and dx search sensitivity. In general, set SENS to “lo” when in metropolitan areas or where stations tend to be strong and local, and to “dx” if in rural areas or where stations tend to be weak and distant.
Seek Tuning
Press or to seek next receivable frequency. Tuning stops at frequency that fulfills sensitivity requirements predetermined.
Manual Tuning
To activate manual tuning press and hold or until you hear a beep. Press or again and the frequency will go one channel/step in the direction pressed. Press and hold causes continuous manual tuning. The manual tuning mode has to be reactivated after 4 seconds or after storing a station on a preset.
Preset Station Storage
After tuning to the desired radio station on the desired band, press and hold a Preset Button for more than 2 seconds to store the current frequency. Audio is muted during the storage, the preset number appears, and a beep acknowledges the storage. The number of the selected preset appears in the display.
Preset Station Selection
Press desired Preset Button.
Travelstore
In any FM Bank, press TS for 2 seconds to activate FM Travelstore. (In AM Bank, press it for 2 seconds to activate AM Travel Store.) “TS” appears. Beginning at the bottom of the band, TS stores five relatively strong stations and returns to preset 1.
Station Scan Tuning
Press SCA. Frequency blinks during scanning. Unit stops at receivable stations for 4 seconds. Unit continuously scans until user stops scan by pressing SCA.
Radio Reception Hint
When listening to weak or distant AM stations, adjusting the Treble to minimum
Stereo Symbol
Stereo symbol “ ” turns on if a stereo station with a sufficiently strong signal is received. The unit gradually switches between mono to stereo automatically.
DEUTSCH
ENGLISH
FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS
29