Blaupunkt RDM 126 KeyCard theft protection system, Removing the KeyCard, Replacing a KeyCard

KeyCard theft protection system

This car radio is supplied with one KeyCard	ERR” will appear in the display. In this case	• Press << or >>.
as standard, though it can also be operated	please do not make any further adjustments.	The display will switch to “CHANGE”.
with a second card.	The system will switch off after approximate-	• Push in the KeyCard. The card is re-
If you have lost your KeyCard or if it was	ly ten seconds.
		leased and put in the proper position
damaged, you can buy a new one from your	When inserting another card type (e.g.
		for being removed.
specialised dealer.	phone or credit card), the display will show
		• Remove the first KeyCard and insert
When using two KeyCards, the settings	“WRONG KC” for approximately two sec-
stored on the first card will be adopted. How-	onds.	the new one while “CHANGE” is still
		being displayed.
ever, you can individually store the follow-	Remove the wrong card and introduce the
		After the display indication “READY” or
ing functions:	correct KeyCard.
Preset button assignments, bass, treble,	After the display indications “CARD ERR” “LEARN KC”,
balance and fader settings, Loudness, TA	or “WRONG KC”:	• press DSC.
(traffic announcement volume), beep vol-	• Press ON to turn on the set.	Now you can also use the new KeyCard for
ume.		operating your unit.
In addition, the settings activated before	Removing the KeyCard	A maximum of two cards can be used for
switching the radio off, such as the wave-	Never pull out the KeyCard directly!	the set.
band, station, TA priority, AF, REG ON/OFF,		When trying to “train” a third one, the ac-
SCANTIME, seek tuning sensitivity and VOL	• First, slightly push in the KeyCard.	cess authorisation for the KeyCard not used
FIX will also remained stored.	This releases the card and puts it in the prop-	for the “training” process will be deleted
This ensures that you will find your basic	er position for being removed.	automatically.
settings re-adjusted automatically as soon	• Now you can pull it out.
as you have inserted your KeyCard.	“Training” a second KeyCard/	Displaying the radio pass data
Putting the unit into operation		Using the KeyCard supplied with your set
	Replacing a KeyCard
		you can have the radio pass data such as
• Turn on the set.	While operating the unit with the first	the model name, product number (7 6 ...)
Introduce the KeyCard into the slot	KeyCard, you can “train” a second one to	and serial number indicated on the display
with the contact area showing up	be also used with the set:	panel.
(KeyCard tongue sticking out).	• Insert the first KeyCard and turn on the	Please refer to chapter “DSC programming
The car radio is now ready for operation.	set.	- READ KC”.

If a wrong KeyCard is inserted, then “CARD • Press the DSC button and select “LEARN KC” with /.

38