Changing the scan time, To start Preset Scan

Scanning stations with Radio-Scan

	Automatically storing the	Scanning stored stations with
	strongest stations with	Preset Scan
	Travelstore	You can have all of the stored stations briefly
		You can have all of the stored stations briefly
	You can automatically store the six most	scanned on all wavebands.
	powerful FM stations of your current recep-	To start Preset Scan:
	tion area sorted according to their signal	To start Preset Scan:
	tion area sorted according to their signal	• Press SC/MIX for approximately two
	strength. This function is particularly con-	• Press SC/MIX for approximately two
	strength. This function is particularly con-	seconds.
	venient on longer trips.	seconds.
	venient on longer trips.	All of the stored stations of the adjusted
		All of the stored stations of the adjusted

•Press the FMT button for two seconds. waveband will be scanned one after the oth-

	“T-STORE” will appear in the display.	er. The memory bank and preset position of
	The six strongest FM stations will be auto-
		the currently scanned station will flash in the
	matically stored on the memory bank “T” display.
	(Travelstore). When this process has been	To select a scanned station and switch
	completed, the radio will play the first sta-
		off Preset Scan:
	tion.
		• Press SC/MIX briefly.
	If desired, stations can also be stored man-

	ually on the Travelstore bank (see “Storing
	stations”).

To select a scanned station and switch off the Radio-Scan function:

•Press SC/MIX briefly.

If no station is selected, the scan function will be automatically switched off after the frequency band has been run through com- pletely. The unit will tune in the station lis- tened to before starting the scan.

Changing the scan time

The scan time can be changed from be- tween five to a maximum of 30 seconds. Please refer to chapter “DSC programming - SCANTIME”.

Selecting the seek tuning sensi- tivity

Recalling stored stations

You can recall any stored station at the touch of a button.

•Select the waveband by pressing FMT or M•L. On FM, also choose the corre- sponding memory bank by pressing the FMT button as many times until the desired bank appears in the display.

•Press the corresponding preset button briefly to recall the station.

		You can alter the automatic seek tuning
	You can also scan all stations which can be	sensitivity.
	You can also scan all stations which can be	If “lo” is displayed, the radio will only pick up
	received.	If “lo” is displayed, the radio will only pick up
	received.	strong, local stations (low sensitivity).
	To start the Scan function:	strong, local stations (low sensitivity).
	To start the Scan function:	If “lo” does not light up, the radio will also
	• Press SC/MIX briefly.	pick up weaker, distant stations (high sen-
	The scanned frequency or the station name	sitivity).
	will start flashing in the display. During the	The sensitivity level can be altered in both

actual scanning process “SCAN” will be dis- modes (see also chapter “DSC program-

played.ming”).

To start Preset Scan:

To select a scanned station and switch

off Preset Scan:

Changing the scan time

To start the Scan function: