Blaupunkt RDM 126 operating instructions Overview of the DSC factory settings

	accept any operations ex-
	cept from being switched
	off. Re-insert the card.
PTY LANG	To select the programme
	type language:
	DEUTSCH or ENGLISH
SCANTIME	Use this function to set the
	scan time for the radio or
	CD player from between five
	and 30 seconds.
S-DX	To adjust the seek tuning
	sensitivity for distant recep-
	tion.
	DX 1 - high sensitivity
	DX 3 - low sensitivity
S-LO	To adjust the seek tuning
	sensitivity for local recep-
	tion.
	LO 1 - high sensitivity
	LO 3 - low sensitivity
	The seek tuning sensitivity
	values can be separately set
	for AM and FM.

CD/CDC UPD

Use this function to clear TPM information and CD names during CD and CDC operation, in order to have more storage capacity for new discs available. See “Clearing TPM information and CD names with DSC- UPDATE”.

AUX	This menu item is not avail-
	able if you have connected
	a CD changer (A 05 or
	F 05).
	The setting made at the fac-
	tory is AUX OFF.
	If you have connected an
	external piece of equipment
	via AUX, this function must
	be set to AUX ON.
VOL FIX	Use this function to select
	the volume at which the ra-
	dio is set when it is switched
	on. Adjust the desired vol-
	ume level with << >>. When
	adjusted to “VOL 0”, the
	system will come on with the
	volume selected before
	switching the radio off.

To quit the DSC programming mode and store the adjustment:

•Press DSC.

Overview of the DSC factory settings

CD NAME	-
LOUDNESS	3
TA VOL	35
SPEECH	0
BEEP	4
ANGLE	0
BRIGHT	16
COLOUR	green
LED	ON
LEARN KC	-
READ KC	-
PTY LANG	ENGLISH
SCANTIME	10 sec.
S - DX	1
S - LO	1
CD UPD	-
AUX	OFF
VOL FIX	0

54