Blaupunkt RCR 127 Specifications, Amplifier, Tuner, Overview of DSC factory set Tape player

TA VOL To adjust the traffic an- nouncement and beep tone volume from between 0 to 63.

The message will then come through at this volume, if the volume adjusted for the pro- gram is lower.

If the program volume is higher than the TA VOL lev- el, the traffic report will be played slightly louder.

LOUDNESS When listening at a low lev- el, the Loudness function creates a more natural sound by boosting the low

LO/DX To adjust the seek tuning sensitivity for local or distant stations.

LO - local stations

LO 1 - high sensitivity

LO 3 - normal sensitivity

DX - distant stations

DX 1 - high sensitivity

DX 3 - normal sensitivity

To quit the DSC programming mode and store the adjustment:

•Press DSC.

The DSC programming mode will be auto- matically quit 8 seconds after having made the last adjustment.

Specifications

Amplifier

Output power: 4 x 23 W RMS power acc. to DIN 45324 at 14.4 V

4 x 35 W max. power

Tuner

FM frequency response:

35 - 16 000 Hz

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS

frequency range. LOUD 1 - Low boost

Overview of DSC factory set-

Tape player

LOUD 6 - Max. boost

STEREO/MONO

You can select between stereo or mono sound.

tingsFrequency response:

40 - 15 000 Hz

Subject to modifications!

SVENSKA ESPAÑOL PORTUGUÊS