![](/images/new-backgrounds/1289337/28933727x1.webp)
Cassette operation
Adjusting the volume for traffic announcements and the beep tone
This volume was preset at the factory,
The car stereo has to be switched on.
The unit will automatically switch to tape operation when inserting a cassette.
To stop fast forward
•press FR.
Fast rewind
though you can alter the value using the DSC function (see “DSC programming – TA VOL”).
You can also change the announcement and
Inserting a tape
•Turn on the set.
•Press FR (fast rewind).
At the beginning of the tape the unit will start playback automatically.
To stop fast rewind
beep volume for the current message only.
Decreasing the volume:
•Press AF/TA briefly.
The usual volume boost is now disabled and you can alter the volume as desired. The priority is deactivated for the current mes- sage only.
Increasing the volume:
•Turn the knob 1 .
| • press FF. |
During cassette operation, “TR 1” or “TR 2” | |
(track) will appear in the display. | Fast winding |
| FR : fast rewind - press FF to stop. |
Insert the tape with side A or 1 facing up, the | FF : fast forward - press FR to stop. |
open side showing to the right. |
|
| Reversing the tape |
| Press FR and FF buttons at a time. |
Ejecting a tape | TR1 or TR2 will appear in the display. |
| |
• Press . | Reversing the tape |
The cassette will eject. | To switch to the other side of the tape dur- |
| |
Fast winding | ing playback, |
• press FR and FF simultaneously. | |
Fast forward | At the end of the tape the unit will automat- |
• Press FF (fast forward). | ically reverse to the other side (autoreverse). |
|
At the end of the tape the unit will au- | The display shows “TR 1” for track (side) 1 | |
or “TR 2” for track 2. | ||
tomatically reverse the direction and | ||
| ||
start playing the other side. |
|
30