Blaupunkt RCR 127 Changing the memory bank, Scrolling through the broadcast, Ing networks

Manual tuning with << >>

For this purpose, start automatic tuning, e.g.

You can also tune in a station manually.

using Travelstore:

• Press TS/FM for 1 sec.; the system

Condition:

starts to run through the frequency

AF must be switched off (i.e. the symbol

band. The display shows “T-STORE”.

does not light up in the display).

If “AF” does not light up,

If necessary, deactivate AF:

• press AF/TA for approximately 1 sec.

• Press AF/TA for about 1 second.

This fulfils the requirements for selecting

Manual tuning:

stations with << >>.

• Press << >>. The frequency will

Changing the memory bank

change in short intervals in downwards

or upwards direction.

You can shift between the memory banks I,

When holding the right or left part of the rock-

II and T in order to store stations and recall

er switch depressed, the frequency scan is

them later.

speeded up.

The currently selected memory bank is in-

dicated in the display.

Scrolling through the broadcast-

• Press the TS/FM button as many times

ing networks

until the desired memory bank lights

You can use the << >> buttons to tune in

up in the display.

stations of your reception area.

Storing stations

If several programmes of the broadcasting

networks can be received, you can scroll

On FM, you can store five stations on the

through them in forwards direction pressing

preset buttons 1, 2, 3, 4, 5 for each of the

>>, or backwards using the << button, e.g.

memory banks I, II and T.

NDR 1, 2, 3, 4, N-JOY, FFN, ANTENNE ...

• Select the desired memory bank.

For this it is necessary that the stations have

• Tune in a station with the rocker switch

been tuned in at least once and that “AF” is

active (lights up in the display).

(either automatically or manually).