Blaupunkt RCR 127 Recalling stored stations, Scanning stored stations with Preset Scan, Loudness

Page 12

If desired, stations can also be stored man- ually on the Travelstore bank (see “Storing stations”).

Recalling stored stations

You can recall any stored station at the touch of a button.

Select the memory bank with TS/FM.

Press the corresponding preset button briefly to recall the station.

Scanning stored stations with Preset Scan

You can have all of the stored stations briefly scanned.

Note:

Loudness

If “TA” shows on the display panel, the sys-

Adjusts the low bass frequencies for a more

tem will scan the stored traffic stations only.

natural sound.

 

Selecting the seek tuning sensi-

Switching Loudness on/off:

• Press the AUD button for approximate-

tivity

You can alter the automatic seek tuning

ly 1 sec.

When the Loudness function is active, “LD”

sensitivity.

will light up in the display.

 

If “lo” is displayed, the radio will only pick up See chapter “DSC programming” for more

strong, local stations.

information.

If “lo” does not light up, the radio will also

 

pick up weaker, distant stations.

 

Should you wish to alter the seek tuning

 

sensitivity, refer to chapter “DSC program-

 

ming – LO/DX”.

 

To start Preset Scan:

Press SCA/SRC for approximately

1 sec. until “SCAN” appears in the dis- play.

All of the stored stations to be received in the selected waveband will be scanned one after the other. On FM, the radio will either scan the stations stored on memory bank I and II or T.

To select a scanned station and switch off Preset Scan:

Press SCA/SRC for about 1 second.

Stereo - mono switching

The radio will only play in stereo if the ster- eo quality of the received station signal is sufficient. When the signal strength gets poor, the radio will gradually switch to mono. You can select between stereo or mono sound in the DSC menu.

For more information, refer to chapter “DSC programming – STEREO/MONO”.

Each time the radio is switched on, stereo sound is activated automatically.

28

Image 12
Contents Dakota RCR Page Contents Quick reference 2, 3, 4, 5 preset buttons Reversing the tape / Fast windingAF / TA Inserting the KeyCardRocker switch DisplayImportant notes KeyCard theft protection system Short Additional Memory S.A.M Turn On Message T.O.MCare of your KeyCard Station tuning Automatic tuningRadio operation with RDS Radio Data System Manual tuning with Changing the memory bankScrolling through the broadcast Ing networksScanning stored stations with Preset Scan Selecting the seek tuning sensiStereo mono switching Recalling stored stationsAutomatic seek tuning start Receiving traffic programme stations with RDS-EONTraffic announcement priority On/offCassette operation Inserting a tapeEjecting a tape Reversing the tapeCare notes DSC programming Specifications To quit the DSC programming mode and store the adjustmentAmplifier TunerBlaupunkt telephone hotline Blaupunkt-Werke GmbH
Related manuals
Manual 20 pages 24.65 Kb Manual 23 pages 43.46 Kb