Blaupunkt RCM 85 Recalling stored stations, Scanning stations with, Radio-Scan

Page 12
28

Automatically storing the stron-

Scanning stored stations

gest stations with Travelstore

with Preset Scan

You can automatically store the six most

You can have all of the stored stations played

powerful FM stations of your current recepti-

briefly on all wavebands.

on area sorted according to their signal

On FM, you can scan the stations of the

strength. This function is particularly conve-

Travelstore memory bank or of the two other

nient on longer trips.

storage levels.

• Press the FMT button for more than

Select the waveband.

2 seconds.

• On FM, choose Travelstore or another

The radio will search for the strongest FM

 

memory bank using the FMT button.

stations and store them on the memory bank

To start Preset Scan:

T (Travelstore). When this process has been

• Press SC/MIX for approximately 2 se-

completed, the radio will play the first station.

 

conds.

If desired, stations can also be stored manu-

 

The stations will be played for approximately

ally on the Travelstore bank (see “Storing

stations”).

8 seconds each.

The positions blinking in the display show

 

Recalling stored stations

you the memory bank and preset position of

the currently scanned station.

 

You can recall any stored station at the touch

To select a station currently being

of a button.

scanned and switch off Preset Scan:

• Select the waveband by pressing FMT

Press SC/MIX briefly.

or M•L. On FM, also choose the corre-

 

 

sponding memory bank by pressing the

Scanning stations with

FMT button as many times until the

Radio-Scan

desired bank appears in the display.

 

 

• Press the corresponding preset button

Beginning with the station currently tuned in,

briefly to recall the station.

you can scan the waveband. The radio will

 

play each station for 8 seconds.

To start the scan:

Press SC/MIX briefly.

The scanned frequency or the station name will start flashing in the display. During the actual scanning process “SCAN” will be displayed.

To select a station currently being scan- ned and switch off the scan function:

Press SC/MIX briefly.

If no station is selected, the scan function will be automatically switched off after the fre- quency band has been run through comple- tely. The unit will tune in the station listened to before starting the scan.

Selecting the seek tuning sensi- tivity

You can alter the automatic seek tuning sensitivity.

If “lo” is displayed, the radio will only pick up strong, local stations (low sensitivity).

If “lo” does not light up, the radio will also pick up weaker, distant stations (high sensitivity). To switch over,

Press lo.

The degree of sensitivity can be altered in both modes (see also chapter “DSC pro- gramming”).

Image 12
Contents Casablanca RCM English Fran Aisç Contents On Off Volume Short instructionsAUD/GEO AUD MTL Dolby B-NR Cassette removal Press Cassette loading slotDisplay Radio operation? 1, 2, 3, 4, 5, 6 preset buttons To switch overFast winding/PROG button = SC/MIXPrecautions Traffic safetyImportant notes Installation/Connection KeyCard theft-protection systemPutting the unit into operation Removing the KeyCardOptical indication for extra SecurityDisplaying the radio pass data Automatic tuning Selecting a wavebandREG regional programme AF Alternative frequencyManual tuning Scrolling through the broad- casting network only FMChanging the memory bank FM Storing stationsSelecting the seek tuning sensi- tivity Recalling stored stationsScanning stations with Radio-ScanSwitching from stereo to mono FM Switching the warning beep offReceiving traffic programme stations with RDS-EON Traffic announcement priorityAutomatic seek tuning start Tape operationInserting a tape Removing a tapeSwitching the audio source Dolby B-NR* Tape equalisation with B/MTLSkipping/repeating titles with CPS Dolby B-NRDSC programming Tape careLocal DISdxOverview of the DSC factory settings BeepLED code LoudSwitching to changer operation Selecting a disc/track using the rocker switchCD changer control optional Specifications AppendixAmplifier TunerBlaupunkt-Werke GmbH Bosch Gruppe
Related manuals
Manual 19 pages 62.7 Kb Manual 19 pages 10.96 Kb