DSC programming, Tape care, Local, DISdx | Blaupunkt RCM 85 instruction

		DSC programming
Tape care		DSC (Direct Software Control) allows you to
To avoid possible problems, you should not		customise certain programmable, basic set-
To avoid possible problems, you should not		tings to suit your personal needs and prefe-
use cassette tapes longer than 60 or 90		tings to suit your personal needs and prefe-
use cassette tapes longer than 60 or 90		rences and then store them.
minutes (C60/C90). Store your tapes in a		rences and then store them.
minutes (C60/C90). Store your tapes in a		The basic settings for this audio equipment
cool place away from dirt, dust and tempera-		The basic settings for this audio equipment
cool place away from dirt, dust and tempera-		were made at the factory. In the following you
tures exceeding 50	° Celsius. Allow very cold	were made at the factory. In the following you
tures exceeding 50	° Celsius. Allow very cold	can find an overview of these settings, so that
tapes to warm up before playing them in		can find an overview of these settings, so that
tapes to warm up before playing them in		you can always reset to these if desired.
order to avoid uneven tape transport. After		you can always reset to these if desired.
order to avoid uneven tape transport. After		If you wish to alter any of the programming,
approximately 100 hours of use, dust partic-		If you wish to alter any of the programming,
approximately 100 hours of use, dust partic-		•	press DSC.
les collected on the playback head or roller		•	press DSC.
les collected on the playback head or roller		The display will show the function adjusted
may lead to tape run problems and sound		The display will show the function adjusted
may lead to tape run problems and sound		last.
distortions.		last.
distortions.		Use the rocker switch to select and adjust the
Use a head cleaning tape to remove normal		Use the rocker switch to select and adjust the
Use a head cleaning tape to remove normal		functions described in the following.
dirt build-up. For tougher cases, use a cotton		functions described in the following.
dirt build-up. For tougher cases, use a cotton
swab (Q-Tip) soaked with alcohol. Do not
attempt to clean by inserting a hard object
into the player!
		/	Select function
			Adjust value –
			Adjust value +
		LOCAL		(lo)
				To adjust the seek tuning
				sensitivity for local recepti-
				on.

LOCAL 1 - high sensitivity

LOCAL 3 - low sensitivity

DIS(dx)

To adjust the seek tuning sensitivity for distant recep- tion.

DIS. 1 - high sensitivity DIS. 3 - low sensitivity

TIME ON/OFF To select the display mode during CD changer opera- tion (option).

TIME ON - display of title and playback time.

TIME OFF - display of CD and title number.

If SCAN or MIX is active, the system will always switch to the TIME OFF mode.

LEARN KC To “define” a second Key- Card for use with the set. Please read the information under “KeyCard theft-pro- tection system”.

TA VOL To adjust the traffic an- nouncement volume from between 1 to 9. The mes- sage will then come through at this volume. (1 = low)