Tape operation:
MTL | - Metal |
B | - Dolby |
CD changer operation (optional):
CD 05 - Disc number
T 02 - Title number
<Fast winding/PROG button
To switch to the other side of the cassette tape:
Press both buttons simultaneously.
The display shows
FR : Fast rewind; stop by pressing FF.
FF : Fast forward; stop by pressing FR.
=SC/MIX
Radio operation
Scan (sampling all stations to be recei- ved): Press SC/MIX briefly.
Preset Scan (sampling all stations stored on the preset buttons): Press SC/MIX for approximately 2 seconds.
Changer operation (optional)
See chapter “CD changer control”.
>SRC (Source)
To switch between the available audio sources, e.g. tape, radio, CD changer (optional).
?1, 2, 3, 4, 5, 6 - preset buttons
You can store six stations on each FM memory bank (I, II, T).
To store a station: Press button during radio operation and hold down until the radio resumes play.
To recall a station: Select the wave- band and on FM also the desired me- mory bank (press FMT button as many times as required). Then press the cor- responding preset button briefly.
@TA (priority for traffic announcements)
If “TA” is displayed, the system will play traffic stations only.
TA on/off: Press button.
AM•L
To select the MW or LW waveband. Press button as many times until the desired band is adjusted.
BFMT - FM, Travelstore
To switch between the FM memory banks I, II and “T” (Travelstore).
To switch over:
Press FMT as many times until the desired bank is indicated in the display. To store the six most powerful stations automatically with Travelstore:
Store: Press FMT; seek tuning starts.
Recall: Press FMT as many times until the display shows “T”. Then briefly press one of the preset buttons 1, 2, 3, 4, 5, or 6.
22