Blaupunkt RCR 148 Recalling stored stations, Scanning stored stations with Preset Scan, Tivity

All of the stored stations on the selected waveband will be scanned one after the oth- er. In the display “SCAN” will alternate with the flashing station name or frequency.

To start Preset Scan:

Notice:

Should you tune in a station which has al- ready been stored before, then the corre- sponding preset position and memory bank will briefly flash in the display.

Automatically storing the strongest stations with Travel- store

You can automatically store the six most powerful FM stations of your current recep- tion area sorted according to their signal strength. This function is particularly conven- ient on longer trips.

•Press the FMT or BND button for 1 sec.

“T-STORE” will appear in the display.

Recalling stored stations

You can recall any stored station at the touch of a button.

•Select the memory bank with FMT or BND.

•Press the corresponding preset button briefly to recall the station.

Scanning stored stations with Preset Scan

You can have all of the stored stations briefly scanned on all wavebands.

Preset Scan cannot be started unless PTY has been switched off (“PTY” is not lit up in the display).

•If necessary, press PTY.

Scanning stations with Radio-		DEUTSCH
Scan
You can briefly scan through all of the re-		ENGLISH
ceivable stations of the selected waveband.
To start the Scan function:
•	Press SC briefly.
The scanned frequency or station name will
flash in the display. During the actual scan-
ning process “FM SCAN” or “AM SCAN” will
be displayed.		FRANÇAIS
To select a scanned station and switch
		ITALIANO
off Radio-Scan:
•	Press SC briefly.
If no station is selected, the scan function
will be automatically switched off after the		NEDERLANDS
frequency band has been run through com-
pletely. The unit will tune in the station lis-

The six strongest FM stations will be auto-

matically stored on the memory bank “T” • Press SC for approximately 1 seconds. (Travelstore). When this process has been

completed, the radio will play the first sta- tion stored on preset 1.

If desired, stations can also be stored man-

ually on the Travelstore bank (see “Storing To select a scanned station and switch stations”).

off Preset Scan:

• Press SC briefly.

Note:

If “TA” shows on the display panel, the sys- tem will scan the stored traffic stations only.

tened to before starting the scan.
Selecting the seek tuning sensi-	SVENSKA
tivity
You can alter the automatic seek tuning
sensitivity.	ESPAÑOL
If “lo” is displayed, the radio will only pick up
strong, local stations.
If “lo” does not light up, the radio will also
pick up weaker, distant stations.
	PORTUGUÊS
To switch the seek tuning sensitivity:
• Press lo briefly.

35