Blaupunkt RCR 148 operating instructions Short Additional Memory S.A.M, Turn On Message T.O.M

Page 11
Care of your KeyCard
Optical indication of anti-theft protection
Flashing KeyCard tongue
When the vehicle is stationary and the Key- Card removed, the KeyCard tongue can be switched to flash for extra anti-theft securi- ty.
For this it is necessary that the positive pow- er supply line and the permanent +12 V lead are connected such as described in the in- stallation instructions.
Be sure that “LED ON” is adjusted in the DSC mode.
If required, please refer to chapter “DSC programming - LED”.
Switching off the flashing light

Short Additional Memory (S.A.M.)

Using the second KeyCard to be purchased at any specialised dealership, you can pro- gram a short text by selecting the DSC menu item READ KC. This text will be moved through the display and might be the tele- phone number of a car repair service or the emergency call number of your auto club.

Any specialised dealer with the proper equipment can program the desired text with up to a maximum of 162 characters onto the KeyCard.

Switching the audio source

Using the SRC button you can switch be- tween radio and tape operation.

Tape operation is only available if a cassette is inserted.

To switch to another source,

•press SRC briefly.

Turn On Message (T.O.M.)

Using the second KeyCard to be purchased

at any specialised dealership, you can pro-

gram the unit to display a selected “Turn On If you would like to deactivate the flashing

Message” after the set is switched on. tongue in general, select “LED OFF” in the Any specialised dealer with the proper DSC menu.

equipment can program the desired text with up to a maximum of 48 characters onto the

KeyCard.

In order to ensure that the KeyCard always

Each time you switch on your car radio us- ing the second KeyCard, this text will ap-

functions correctly, it is important for the

pear in the display.

contacts to be free from any foreign parti- cles. Avoid direct skin contact.

If necessary, clean the KeyCard contacts using a cotton swab dipped in alcohol.

32

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Bergamo RCR Montana RCR Wiesbaden RCR 13 12 Contents Quick reference AUD B Remote control DisplayExtra rocker switch functions DSC Mode aFlashing KeyCard tongue To switch over3, 4, 5, 6 preset buttons Insert KeyCardExtra function Preset ScanSRC Source Extra function of lo button Extra function AUD Adjusts the treble and bass frequen- cies Setting the balance left/right and the fader front/rear AUDImportant notes Precautions Installation AccessoriesTraffic safety Remote controlKeyCard theft protection system Turn On Message T.O.M Short Additional Memory S.A.MAF Alternative frequency Radio operation with RDS Radio Data SystemSelecting a waveband REG regional programmeStoring stations Station tuningAutomatic tuning Manual tuning withScanning stations with Radio Scanning stored stations with Preset ScanSelecting the seek tuning sensi Recalling stored stationsNews Switching from stereo to monoLoudness Programme typeFolk Music Documentary PTY priority On/off Automatic seek tuning startReceiving traffic programme stations with RDS-EON Traffic announcement priorityRemoving a tape Tape operationFast Forward/Rewind Inserting a tapeCare notes Listening to the radio during fast tape winding with RMAM on / OFF Bergamo RCR DSC programmingVOL FIX To quit the DSC programming mode and store the adjustmentOverview of DSC factory set- tings Tape player SpecificationsAppendix TunerBlaupunkt-Werke GmbH
Top Page Image Contents