KeyCard theft protection system
DEUTSCH
This car radio includes one KeyCard as standard equipment, but it can also be op- erated with a second card.
If you have lost your KeyCard or if it was damaged, you can buy a new one from your specialised dealer.
If a wrong KeyCard is inserted, then “CARD • ERR” followed by “WAIT” will appear in the display. In this case please do not make any further adjustments.
The system will switch off by itself after ap- proximately 10 seconds.
ENGLISH
If you use two KeyCards, you can store the following functions individually for each card:
Bass, treble, balance and fader settings, Loudness, TA (traffic announcement vol- ume), TA priority, AF, beep volume, mute volume, lo or dx, PTY functions, RM ON/ OFF.
In addition, the settings which are activated before you switch the radio off, such as the waveband (only Bergamo RCR 148) and station will also remained stored.
This ensures that you will find your basic settings
Operating the unit
•Turn on the set.
With the KeyCard tongue protruding out of the unit, insert the KeyCard into the slot with the contact area facing up in the middle of the area.
The car radio is now ready for operation.
If another card type is inserted (e.g. phone |
|
|
|
|
| FRANÇAIS | |
or credit card), the display will show | After the display indication “READY” or |
| |
“WRONG KC” for approximately 2 seconds. “LEARN KC”, |
| ||
Remove the wrong card and insert the cor- | • press DSC. |
| |
|
| ||
rect KeyCard. | Now you can also use the new KeyCard to |
|
|
| ITALIANO | ||
After the display indications “CARD ERR” operate your car stereo. |
| ||
or “WRONG KC”: | A maximum of 2 cards can be used for the |
| |
• Press ON to turn on the set. | set. |
| |
|
| ||
Removing the KeyCard | If you attempt to “train” a third one, the ac- | NEDERLANDS | |
cess authorisation for the KeyCard not used | |||
• Pull out the KeyCard tongue and re- | for the “training” process will be deleted au- | ||
tomatically. | |||
move the card. |
|
|
|
Displaying the radio pass data |
| SVENSKA | |
“Training” a second KeyCard/ |
| ||
Using the KeyCard supplied with your set |
| ||
Replacing a KeyCard |
| ||
When the unit is operated with the first Key- | you can have the radio pass data such as |
|
|
the model name, product number (7 6..) and |
| ESPAÑOL | |
Card, you can “train” a second one which serial number indicated on the display pan- |
| ||
can also be used with the set. | el. |
| |
To “train” a second KeyCard: | Please refer to chapter “DSC programming |
| |
|
| ||
• Insert the first KeyCard and turn on the | - READ KC”. |
|
|
| PORTUGUÊS | ||
|
| ||
set. |
|
| |
|
|
| |
|
|
|
|
31