Volume | Radio mode |
Set the desired volume with the 
or 
button 8.
When you have finished making your changes,
press the MENU button twice ;.
Note:
You can use the volume control 4 to adjust the volume of telephone calls and navigation announcements whilst you are listening to them.
Switching the confirmation beep on/off
The system will output a confirmation beep for some functions if you keep a button pressed down for longer than two seconds, for instance, when assigning a radio station to a station preset button. You can switch the beep on or off.
Press the MENU button ;.
Press the 
or 
button :repeatedly until "BEEP ON" or "BEEP OFF" appears on the display.
Switch the BEEP ON or OFF with the 
or 
button 8.
When you have finished making your changes,
press the MENU button ;.
Radio mode
This device is equipped with an RDS radio receiver. Many of the receivable FM stations broadcast a signal that not only carries the programme but also additional information such as the station name and programme type (PTY).
The station name appears on the display as soon as the tuner receives it.
Adjusting the tuner
To ensure proper functioning of the tuner, the device must be set for the region in which it is being operated. You can select among Europe "EUROPE", America "USA", South America
The radio functions described in these op- erating instructions refer to the tuner set- ting EUROPE.
Switch off the device by pressing but- ton 2.
Hold the buttons 1 and 5 5pressed at
the same time and switch on the device again with the button 2.
"TUNER" is displayed.
Select your tuner region with the 
or 
button :.
To save the setting,
switch the device off and on again or wait approx. 8 seconds. The radio starts playing with the last setting se- lected (radio, CD, CD changer or AUX).
ENGLISH
47