Radio mode
Storing stations
Storing stations manually
Select the desired memory bank (FM1, FM2, FMT) or one of the wavebands (MW or LW).
Tune into the desired station.
Press and hold down one of the station buttons 1 - 5 5 for longer than two seconds to assign the station to that button.
Storing stations automatically (Travelstore)
You can automatically store the five sta- tions offering the strongest reception in the region (FM only). The stations are stored in the FMT memory bank.
Note:
Any stations that were previously stored in this memory bank are deleted in the process.
Press and hold down the BAND•TS but- ton =for longer than two seconds.
The storing procedure begins. "FM TSTORE" appears on the display. After the process has completed, the radio will play the sta- tion that is stored in memory location 1 of the FMT memory bank.
Note:
If the priority for traffic information is active (the display shows the traffic jam symbol), only traffic information stations are stored.
Listening to stored stations
Select the memory bank or waveband.
Press one of the station buttons 1 - 5
5.
The stored station is played if it can be received.
Scanning receivable stations (SCAN)
You can use the scan function to play all the receivable stations briefly. You can set the scanning time in the menu to between 5 and 30 seconds.
Starting SCAN
Press and hold down the MENU button ;for longer than two seconds.
The radio scans the next receivable station. The current memory bank and "SCAN" ap- pear briefly on the display followed by a flashing display of the current station name or frequency.
Cancelling the SCAN and continuing to listen to a station
Press the MENU button ;.
Scanning stops and the radio continues playing the station that it tuned into last.
Setting the scanning time
Press the MENU button ;.
Press the 
or 
button : repeat- edly until "SCAN TIME" appears on the display.
Press the 
or 
button 8to open the menu.
Set the desired scan time with the 
or 
button 8.
50