Display | External audio sources |
Selecting a display illumination during a colour scan
Press the MENU button ;.
Press the or button : repeat- edly until "COL SCAN" appears on the display.
Press the or button 8to start the colour seek.
The device starts changing the display illu- mination colour.
To select the currently set colour,
press the MENU button ;. To start the seek tuning again,
press the or button 8. If you found the desired colour,
press the MENU button twice ;.
External audio sources
External audio sources, such as portable CD players, MiniDisc players or MP3 play- ers, can be connected to the device in two ways:
1.Via the rear AUX input (if no CD changer is connected to the device).
Notes:
•An adapter cable is needed to con- nect an external audio source via the rear AUX input. You can obtain this ca- ble (Blaupunkt no.: 7 607 897 093) from your Blaupunkt dealer.
•The rear AUX input must be activated in the menu.
•The rear AUX input can be selected
with the SOURCE button 3. "AUX INPUT" then appears on the dis- play.
2.Via the front
Note:
As soon as an audio source is con- nected to the front
it can be selected with the SOURCE button 3. "FRONT AUX" then ap- pears on the display.
ENGLISH
69