Radio mode
Switching to radio mode
If you are in CD, CD changer or AUX mode,
press the BAND•TS button =
or
press the SOURCE button 3 repeat- edly until the memory bank, e.g. "FM1", appears on the display.
Convenient RDS functions (AF, REG)
The convenient RDS functions AF (Alternative Frequency) and REGIONAL ex- tend your radio’s range of functions.
•AF: If the RDS function is activated, the radio automatically tunes into the best receivable frequency for the station that is currently set.
•REGIONAL: At certain times, some ra- dio stations divide their programme into regional programmes providing different content. You can use the REG function to prevent the car radio from switching to alternative frequencies that are transmitting different pro- gramme content.
Note:
REGIONAL must be activated/deacti- vated separately in the menu.
Switching REGIONAL on/off
Press the MENU button ;.
Press the 
or 
button :repeatedly until "REG" appears on the display.
"OFF" or "ON" is displayed alongside "REG". To switch REGIONAL on/off,
press the 
or 
button 8.
When you have finished making your changes,
press the MENU button ;.
Switching the RDS function on/off
To switch the RDS functions AF and REGIONAL on or off,
press and hold down the TRAF•RDS button 7 for longer than two sec- onds.
If the RDS comfort function is active, RDS appears on the display.
Selecting the waveband/ memory bank
This device can receive programmes broad- cast over the FM frequency range as well as the MW and LW (AM) wavebands. There are three memory banks available for the FM waveband (FM1, FM2 and FMT) and one for each of the MW and LW wavebands.
Five stations can be stored in each memory bank.
To switch between the FM memory banks (FM1, FM2 and FMT) and the MW and LW wavebands,
briefly press the BAND•TS button =.
48