Software update
You can update the software of the interface your- self to render the interface compatible with new- er cell phones.
Note:
When you update the software, it is possible that these operating instructions are no longer
The following are required to update the software:
•USB data carrier (e.g. USB stick) with FAT16 or FAT32 formatting and at least 4 MB free memory capacity
•Computer with Internet access
•ZIP software
Updating
On the USB device, create the "Blaupunkt" directory at the top level. Example: "W:\ Blaupunkt"
Load the software of the Bluetooth/USB inter- face from www.blaupunkt.de and store it in a directory of your computer.
Unzip the ZIP file and copy the unzipped files to the Blaupunkt directory on the USB device.
Deactivate the USB device at the computer.
Connect the USB device with the USB cable of the interface.
Turn on the car sound system.
Press and hold the PTT button or the green phone button while switching the car sound system off and on again.
Release the PTT button or the green phone button.
The loading process starts.
Select CD Changer (CDC) at the car sound system as the audio source.
The display shows the progress of the load proc- ess. At the same time, the title numbers "1" through "5" are shown in ascending order and the current time for every title number. After the load process has completed, the display shows the track number "99" and the time "59:59".
Notes:
•If the progress indicator stops before the end of the loading process, disconnect the USB data carrier and reconnect it to the USB ca- ble of the interface. If this is not successful, repeat the update process.
•If the time "00:00" is displayed at the end of the loading process, an error occurred. In this case, repeat the update process.
Switch the car sound system off and on again.
The new software is now activated.
Reading out technical data
During the update, two files with information about the interface and the update process are created in the "Blaupunkt" directory of the USB data carrier. Both files can be opened and read on a computer using a plain text editor:
•The "id.txt" file contains information about the status of the interface, e.g. the current hardware and software version as well as the Bluetooth ID of the interface.
•The "setup.log" file contains informa- tion about the process of the update, e.g. the message about a successful installation or any errors that occurred.
39