Blaupunkt 7 607 545 550 manual Safety notes, Recycling and disposal, Declaration of conformity

Page 6

ENGLISH

We provide a manufacturer's warranty for our products purchased within the European Union. You can view the warranty terms at www.blaupunkt.de or request them directly from:

Blaupunkt GmbH

Hotline

Robert Bosch Str. 200

D-31139 Hildesheim

Safety notes

Before drilling holes for mounting, ensure that no routed cables or vehicle components are damaged!

Do not install the USB socket, microphone and PTT button in the deployment area of the airbag, and ensure that the tray is safe and solid so that passen- gers in the vehicle are not at risk during emergency braking. Use cable glands for holes with sharp edges.

The negative terminal on the bat- tery must be disconnected while the device is being installed and connected.

Observe the safety notes from the vehicle manu- facturer (airbag, alarm systems, on-board com- puters, immobilisers).

Recycling and disposal

Please use the return and collection systems avail- able to dispose of the product.

Declaration of conformity

The Blaupunkt GmbH declares that the Bluetooth/ USB Interface device complies with the basic re- quirements and the other relevant regulations of the directive 1999/5/EG.

Dear customer,

the firmware "SW8C01VW" for the Bluetooth USB interface (BT-USB interface, 7607 545 500 001) is now available and provides several new func- tions that we would like to explain below.

A

significant innovation

since SW8625VW

is

the support for

the OLED display

(7 607 548 500 001).

 

Caution:

Before startup of the OLED display, it is nec- essary to update the firmware of your BT-USB interface (see the section Software update).

The following instructions assume that the firmware of your BT-USB interface has already been updated, and the language was set to English (see the section Settings menu).

This firmware can also be used with your PTT like the previous versions. The OLED-specific control and display options listed below are not available in this case.

Switch-on

The OLED display switches on automatically as soon as you switch on your radio or radio naviga- tion device (RNS).

Switch-off

The OLED display switches off automatically as soon as you switch off your radio or radio naviga- tion device (RNS).

You can also switch off the display manually; to do so, press and hold the red phone button for longer than 5 seconds. The buttons remain illumi- nated to improve navigation at night.

In the "Display -> Standby" Settings menu, you can preselect a time after which the display au- tomatically switches off with switched-on radio, e.g. to reduce a possible distraction of the driver.

25

Page 5 Page 7
Image 6
Page 5 Page 7
Contents 607 545 Connection / Anschluss Fakra Connection / Anschluss ISO AudiTechnical Data / Technische Daten USBSettings Safety notesSwitch-on Switch-off ConnectionSwitch-off Safety notesSwitch-on Recycling and disposalRegistering pairing your cell phone with the interface After initial switch-onDisplays and controls Page Overview of functions Previously possiblePreviously possible Technically not possible NotPos Function not available Sible Telephone incoming call Telephone outgoing callAudio streaming via BT Tip Oled or PTT MP3 playback via USBBrowsing Oled Currently played MP3 file is preselected and identified withFolder management / Structure on USB removable data carrier Default ModeExtended Mode Lets assume that the USB drive is U \Blaupunkt\Settings menu Oled only Which settings are active?Operation with PTT Settings Function Display Switch-onScroll mode BrightnessID3 Config InfoDisplay module Standard Factory settingRadio Config VW GammaSoftware update Reading out technical dataUpdating Id.txt Display of technical data Changing the configuration PTTLoading a configuration file Subject to change FCC-Statements GeneralSpecific Part Service numbers, Service-Nummern Country Phone Fax
Top Page Image Contents