Sharp DK227N Use, For, Antenna connection, Speaker connection, Connecting iPod to a TV

Page 11

Antenna connection

Supplied FM antenna:

Connect the FM antenna wire to the FM 75 OHMS jack and position

the FM antenna wire in the direction where the strongest signal can be received.

Supplied AM loop antenna:

Connect the AM loop antenna to the AM and GND terminals. Position the AM loop antenna for optimum reception. Place the AM loop

antenna on a shelf, etc., or attach it to a stand or a wall with screws (not supplied).

Note:

Placing the antenna on the unit or near the AC power cord may cause noise pickup. Place the antenna away from the unit for better reception.

Installing the AM loop antenna:
< Assembling >	< Attaching to the wall >

XL-DK227N

Speaker connection

Connect the black wire to the minus (–) terminal, and the red wire to the plus (+) terminal.

Red	Black	Use
Caution:
Use speakers with an impedance of 4 ohms or more, as lower
impedance speakers can damage the unit.		for
Do not mistake the right and the left
channels. The right speaker is the one on the		Preparation
right side when you face the unit.

Do not let the bare speaker wires touch
each other.
Do not allow any objects to fall into or to be
placed in the bass reflex ducts.
Do not stand or sit on the speakers. You may
be injured.	Incorrect

Connecting iPod to a TV

The iPod with photo and video can be viewed by connecting to a TV/ monitor.

If the TV/monitor has a video input, connect it to the VIDEO OUT jack on the rear of the unit.

Video cable

TV

Wall Screws (not supplied)

(not supplied)

To video

input jack

Note:

Please make sure to set iPod unit to either NTSC or PAL to match your TV signal. Please visit Apple’s home page for futher information.

11

Image 11

Contents FM antenna IPod adaptor Remote control AM loop antennaThank you for purchasing this Sharp product Important Instruction Explanation of Graphical SymbolsImportant Safety Instructions XL-DK227NIMPORTANT Safety Instructions Special Note ContentsGeneral XL-DK227NPrecautionsVolume control Front panel Controls and indicatorsSpeaker system DisplayRear panel Remote control Antenna connection see AC power connection seeXL-DK227NSystem connections Preparation for UseAntenna connection Connecting iPod to a TVUse ForOutdoor FM antenna AC power connectionDemonstration mode For UseClose the cover Precautions for battery use Remote controlBattery installation Test of the remote controlBasic Operation XL-DK227NGeneral controlTo change the 12-hour or 24-hour display Setting the clock Remote Control onlyTo readjust the clock To conﬁrm the time displaySupported iPod models Auto power on functionListening to the iPod IPod adaptor connectionIPod playback To insert iPod adaptorTo remove iPod unit To remove iPod adaptorWatching videos on a TV connected to iPod To disconnect iPodNavigating the iPod menus with the remote con- trol Various iPod functions Listening to a CD or MP3/WMA discCD or MP3/WMA disc Playback To remove the discs Press the OPEN/CLOSE button to close the disc trayDirect track search Advanced CD or MP3/WMA disc playbackVarious disc functions Random play Repeat playProgrammed play DiscAbout folder playback order XL-DK227NMP3/WMA folder mode only for MP3/WMA ﬁlesMP3/WMA disc Playback To play back CD-R/RW Procedure to play back MP3/WMA disc with folder mode onRadio TuningAuto tuning Listening to the radioTo recall a memorized station To scan the preset stationsTo erase entire preset memory Memorizing a stationAdvanced Timer and sleep operation Remote Control onlyFeatures Timer playbackAdvanced Features Sleep operation Checking the timer setting in the timer stand-by modeCanceling the timer setting in the timer stand-by mode Reusing the memorized timer settingEnhancing your system To use timer and sleep operation togetherSubwoofer connection HeadphonesCD player Troubleshooting chartSymptom Possible cause ReferencesMaintenance Speaker SpecificationsAmplifier Sharp Electronics Corporation