Sharp DK227N operation manual For Use, AC power connection, Outdoor FM antenna, Demonstration mode

Page 12

XL-DK227NSystem connections (continued)

for Use

AC power connection

After checking all the connections have been made correctly, plug the AC power cord of this unit into the AC outlet. If you plug in the unit first, the unit will enter the demonstration mode.

AC outlet

(AC 120 V ~ 60 Hz)

Note:

Unplug the AC power cord from the AC outlet if the unit will not be in use for a prolonged period of time.

Outdoor FM antenna

Use an outdoor FM antenna if you require better reception. Consult your dealer.

Outdoor

FM antenna

75 ohms coaxial cable

Note:

When an outdoor FM antenna is used, disconnect the supplied FM antenna wire.

Preparation

Demonstration mode

The first time the unit is plugged in, the unit will enter the demonstration mode. You will see words scroll.

To cancel the demonstration mode:

When the unit is in the power stand- by mode (demonstration mode), press the X-BASS/DEMO button. The unit will enter the low power consumption mode.

To return to the demonstration mode:

When the unit is in the power stand-by mode, press the X-BASS/DEMO button again.

Note:

When the power is on, the X-BASS/DEMO button can be used to select the extra bass mode.

12

Image 12

Contents Remote control AM loop antenna Thank you for purchasing this Sharp productFM antenna IPod adaptor Explanation of Graphical Symbols Important InstructionImportant Safety Instructions XL-DK227NIMPORTANT Safety Instructions Contents Special NoteXL-DK227NPrecautions Volume controlGeneral Controls and indicators Front panelDisplay Rear panelSpeaker system Remote control AC power connection see XL-DK227NSystem connectionsPreparation for Use Antenna connection seeConnecting iPod to a TV UseFor Antenna connectionAC power connection Demonstration modeFor Use Outdoor FM antennaRemote control Battery installationTest of the remote control Close the cover Precautions for battery useXL-DK227NGeneral control Basic OperationSetting the clock Remote Control only To readjust the clockTo conﬁrm the time display To change the 12-hour or 24-hour displayAuto power on function Listening to the iPodIPod adaptor connection Supported iPod modelsTo insert iPod adaptor To remove iPod unitTo remove iPod adaptor IPod playbackTo disconnect iPod Navigating the iPod menus with the remote con- trolWatching videos on a TV connected to iPod Listening to a CD or MP3/WMA disc CD or MP3/WMA disc PlaybackVarious iPod functions Press the OPEN/CLOSE button to close the disc tray To remove the discsAdvanced CD or MP3/WMA disc playback Various disc functionsDirect track search Repeat play Random playDisc Programmed playXL-DK227NMP3/WMA folder mode only for MP3/WMA ﬁles MP3/WMA disc PlaybackAbout folder playback order Procedure to play back MP3/WMA disc with folder mode on To play back CD-R/RWTuning Auto tuningListening to the radio RadioTo scan the preset stations To erase entire preset memoryMemorizing a station To recall a memorized stationTimer and sleep operation Remote Control only FeaturesTimer playback AdvancedAdvanced Features Checking the timer setting in the timer stand-by mode Canceling the timer setting in the timer stand-by modeReusing the memorized timer setting Sleep operationTo use timer and sleep operation together Enhancing your systemHeadphones Subwoofer connectionTroubleshooting chart Symptom Possible causeReferences CD playerMaintenance Specifications AmplifierSpeaker Sharp Electronics Corporation